-18"hg 12v Dc Vacuum Pump → Hobby/lab Projects (wet Or Dry)


-18

This item has been shown times.

Buy Now

-18"hg 12v Dc Vacuum Pump → Hobby/lab Projects (wet Or Dry):
$15


Achieve -18" Hg vacuum with a single 12V vacuum pumpPump system is all plastic free and easy setupEach pump is 9cm x 7cm x 4cm and weighs 260g Doubles as a 25 psi air compressorComes with 2.1mm female DC input Instructions  This 12V diaphragm  pump is powerful, small and versatile. It has a wide range of laboratory, light industrial and hobby applications. It's modular design means more pumps can be connected in series or parallel if so required.

 We also sell related items at our store ThinkItMakeIt.   Vacuum Range: -18" Hg to 0 (-0.6 to 0 Bar) - where 0" Hg is at atmospheric pressure 
Air Compression Range: 0 to 25 psi  - where 0" Hg is at atmospheric pressure 
Airflow: 9-15 LPM (litres per minute) at atmospheric pressure
Pump Dimensions: 7cm x 4cm x 9cm (length x width x height) 
Weight: 260g
Motor Voltage Range: 6V to 12V 
Inlet and outlet nozzels are 1/4" barbs 
5 hours continuous operation 
Time To Maximum Vacuum: approx. 1 min per litre of vacuum chamber volume 


You will receive:

1x 12V Diaphragm Pump
1x 2.1mm DC Female Input Connector

All the components in this kit are new.  
For any more questions you might have please contact us through the message system.

Q: Does it matter which way the terminals are connected?
A: Air flow always in the same direction no matter which way the terminals are connected. Minimal assembly is required and no tools are needed. Setup should take 2 minutes.

1. Attach the DC connector leads to the copper terminals located at the top of the of the pump. Note that it doesn't matter which way round the terminals are connected; the air will flow the same direction.

2. Connect your own 12V DC 2A supply with 2.1mm male plug into the DC connector (or skip 1. if you want to connect your supply directly to the pump's terminals).

3. Find the small arrows marked on the pump's plastic inlet (air intake) and outlet (exhaust) barbs.

4. Connect your own 6mm (1/4") internal diameter hose to the pump's inlet.

Note: Please don't use jubilee clips on the hose as they actually create air gaps; 6mm (1/4") internal diameter hose makes a perfect seal onto the pump's barbs without any help.

Posted with Mobile


-18"hg 12v Dc Vacuum Pump → Hobby/lab Projects (wet Or Dry):
$15

Buy Now



Super Swivels Hr42-0084 Stainless Steel 304, 1
Super Swivels Hr42-0084 Stainless Steel 304, 1" Npt, Live Threaded Swivel New


5pcs Ddm8 40x30mm Type Rubber Anti Vibration Damping Down Noise picture
5pcs Ddm8 40x30mm Type Rubber Anti Vibration Damping Down Noise


New Hydraulic Motor For Monarch Mte Wapsa Blizzard Snow Applications Mmy4003  picture
New Hydraulic Motor For Monarch Mte Wapsa Blizzard Snow Applications Mmy4003


Enerpac Pa-133r Air Hydraulic Power Pump With Relief Valve picture
Enerpac Pa-133r Air Hydraulic Power Pump With Relief Valve


Flowline Level Switch, Sump Float, Spdt, 10a Lv42-7201 picture
Flowline Level Switch, Sump Float, Spdt, 10a Lv42-7201


Viking: 2-436-007-291-00 Idler Pin - New picture
Viking: 2-436-007-291-00 Idler Pin - New