6 X 1.0 Serrated Wilton Vise Jaws: Fits The 746, 1760 And The Old Chigago # 6


 6 X 1.0 Serrated Wilton Vise Jaws:  Fits The 746, 1760  And The Old Chigago # 6

This item has been shown 0 times.

Buy Now

6 X 1.0 Serrated Wilton Vise Jaws: Fits The 746, 1760 And The Old Chigago # 6:
$80


A pair of new replacement Serrated Vise Jaws for the 6 inch 746, Old Chigago # 6 and the 1760 Tradesman Vise.

Supplied with (4) 5/16:18 Socket Head Cap Screws.


If you need a smooth set then log in to wiltonviseparts.net

This A-2 Tool Steel is Heat Treated to 54-56 Rockwell. The colorfull pattern on the serrated jaws happens during Heat Treating when nitrogen is used.

This steel is air Hardened Tool Steel. After Heat Treating I grind three sides flat and sguare after I hand lap the serrated face flat so there will not be any un necessary stresses when bolted in place.

Made in the USA



Length 6.0

Width 1.0

Thickness 5/8

Distance between screws. 4.0

Screw Centered in width.

Screw 5/16:18



6 X 1.0 Serrated Wilton Vise Jaws: Fits The 746, 1760 And The Old Chigago # 6:
$80

Buy Now



 Kurt 6
Kurt 6" Vise D675 "made In U.s.a." Nice


Hiltex 55091 4
Hiltex 55091 4" Cross Slide Vise, Heavy Duty | 2-way X Y Axis Drill Press | For


Vintage Small Machinist Vise picture
Vintage Small Machinist Vise


Toolmaker Machinist Tookmaking Clamp Vise Work Holder Opening 4 1/4 picture
Toolmaker Machinist Tookmaking Clamp Vise Work Holder Opening 4 1/4


Toolmaker Machinist Tookmaking Clamp Vise Work Holder Opening 5 1/8  picture
Toolmaker Machinist Tookmaking Clamp Vise Work Holder Opening 5 1/8


Kkk 150 6
Kkk 150 6" Machinist Vise W/swivel Base 5-7/8"