2\"x72\" Belt Sander/Grinder Rubber Contact Wheel, 100mm,(4\") Knife Making Wheel

2\

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

2\"x72\" Belt Sander/Grinder Rubber Contact Wheel, 100mm,(4\") Knife Making Wheel:
$79.00

You are offerding on oneNew Smooth Rubber Contact Wheel for usewith 2\" wide grinding belts. This wheel is 100mm(approx 4\") x 50mm(approx 1-15/16\")x 32mm(approx 3/4\") of solid medium density rubber. The wheel has two large 6202RS bearings installed in the hub.The 6202RS bearings have a 1/2\" ID bore. The bearings are press fit into the hub and shoulder against internalretaining rings.The retaining rings sit ina slot cut inside the hub. The hub is cast aluminum and is machined. There is a precision fit heavy machined spacer in the hub between the bearings. The spacer is so you cannot squeeze the bearings together and over tighten them with a bolt.Thealuminum wheel hasthe usualscratch marks, and sometimes a few small porosity marksbut all of them arecosmetic.This is a nice wheel,andisground concentric. Please note: The last photo is just to show what the internal spacer looks like. The internalspaceris already installed in thewheel hub.

2\"x72\" Belt Sander/Grinder Rubber Contact Wheel, 100mm,(4\") Knife Making Wheel:
$79.00

Buy Now