for Plymouth Dodge fender belt moulding clips sealer nuts 1-1/4\" - 1-5/8\" NORS

---

---

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

---

for Plymouth Dodge fender belt moulding clips sealer nuts 1-1/4\" - 1-5/8\" NORS:
$16.79

---

You are buying six (6) NOS Auveco fasteners. They are general purpose (universal) adjustable moulding clips with mastic sealer and nuts with mastic sealer that fits Chrysler, DeSoto, Dodge, Plymouth, Jeep and AMC that have a 1-1/4\" to 1-5/8\" wide moulding.The clips have a 2.000\" long x .545\" wide plate with a 10-24 threaded stud that is .590\" long.The mastic sealer nuts have a 3/8\" hex and a 1/2\" flange diameter. The sealer on clips is 1/8\" thick x 1/2\" diameter. The nuts and sealerareNOTold stock.

The clips are for a deep moulding and have two tabs to hold the clips tight in the moulding. The threaded stud is adjustable (see photos) so that you can offset the clip in themoulding.The clips are zinc plated and there is some slight discoloration because of age but the clips are just fine.

Please note that these clips are NOT for any specificmouldingsand may not be for some of the compatibility applications listed as we do not have all the body codes. Pleasecompare your application to thephotos and the sizes that we have provided.

---

for Plymouth Dodge fender belt moulding clips sealer nuts 1-1/4\" - 1-5/8\" NORS:
$16.79