80cc / 66cc 2-stroke Skyhawk Gt5 Bicycle Engine Kit For Motorized Bicycle For Sale
*Please take note that
we cannot ship this engine kit to California.
It Is the customers
responsibilityto check with their local and state laws that the engine
kit that they are purchasing is legal and permitted to install and use on their
bicycle for on-road and off-road.See Notices an Disclaimer below.
Inc., China Gas has extended more of its bicycle motor kits to the NationWide
Access, LLC family of websites to distribute. These GRUBEE SkyHawk GT5 66cc
bicycle engine kits give 1.95 – 2.75 HP “the little powerhouse engine of the
industry.” These kits are known as the Rolls Royce of motors and have
"Black Cat" Mufflers which are EPA Approved and Certified which is
why we carry them and the6-Month
Warranty on manufacturer defects.
2.75 hp 2 cycle
gas/oil mix bike motor kits. GRUBEE SkyHawk GT5 66cc/80cc Bike Motor Kit: 1/2
gal. gas tank, chain and sprocket, handlebar controls, mounting hardware
package and instruction sheet. Total wt. is 24 to 27 lbs.
GRUBEE SkyHawk GT5
66cc/80cc Bike Motor Kit (Standard Finish) fits best on bikes with 25 to 30mm
diameter 70 degree Vee type frames but can be installed on larger diameter tube
frames with modifications. “Looks Cool” on the older cruiser type coaster brake
This bike motor kit comes with everything that you'll need except gas and oil!
You will be able to stop or start the engine as you ride. There is no rope
pulling needed and it gives more speed and gets around 150 miles on a gallon of
gas. Please Tell a Friend about this product and help spread the word about
How are angle fire
slant head motors different? The spark plug at the top is at a 45 degree angle
instead of straight up. This gives the motor higher compression and adds up to
an extra 3 MPH.
Get your GRUBEE SkyHawk GT5 66cc/80cc Slant Head Bike Motor Kit (Standard
Finish) now while supplies last at this price.Wholesale SkyHawk GT5 66cc/80cc
Bicycle Motor Kits can be made here.
Bicycle Motor Engine Kit Includes:
GRUBEE SkyHawk GT5
66cc/80cc Slant Head Bike Motor Kit (Standard Finish)
2.75 HP. - Speed
depends on rear sprocket ratio and weight of rider, weight of bike, the climate
and the terrain being ridden.
Standard Engine Finish
Friction Clutch, Pedal
Magneto With Solid
State New Design Capacitive Discharge (CD) Ignition
2 Cycle air cooled gas
/ oil mix engine.
44-Tooth, 9 Hole
5 Plate Sprocket Kit
2.5 Liter/0.66 Gallon
Fuel Tank, Tear Drop Shape (Black Color)
New EPA Approved Black
Cat Muffler with Heat Shield
Push Button Clutch
Lever And Cable
Twist Throttle With
Engine Kill Switch
New EPA Approved High
Performance Fuel Line
Improved Gas Valve
Drive Chain Idler
New EPA Approved High
Performance CNS Carburetor ($65 value!)
Chrome Lined Cylinder
Head With Center Fire
202 Crankcase Bearings
Needle Bearings On
Piston Wrist Pin
Standard 410 Chain
External Choke Control
Long Z steel tube
Paper cone AC
Extra Spark Plug
Included In Tool Kit
All The Mounting
Brackets, Gaskets, And Hardware Including Nylon Locking Nuts
Complete User Manual
Warranty Included - FREE
Free technical support
within one (1) week after receiving the kit
This bicycle motor
engine kit fits most Mens 24" and larger bicycles which includes mountain,
cruiser, chopper and road bikes with a V-frame with at least a 8.5" height
clearance for the engine. Larger frame size requires drilling into bike frame
and use of the universal face plate.
This 80cc bicycle
motor engine kit is about 8.5" height 7" length 5" width and
fits on most standard 24" – 26" or 25mm 29mm frame bicycle frame
tubes. Larger frame size requires drilling into bike frame and use the
universal face plate. This engine kit only adds about 24 lbs to your bike.
When New: 16 to 1 (8oz per Gallon)
After 2 Tanks Of Break In: 32 to 1 (4oz
The engine crankshaft
bearings are lubricated from the oil in the gas mix. A rich break in oil
mixture ensures bearings will not cease during engine break in period.
Starting your GRUBEE SkyHawk GT5 66cc/80cc
Bike Motor Kit (Standard Finish):
Pedal normally or use engine power at your
option. The engine starts quickly when the handlebar clutch lever is released
while pedaling. Twisting the throttle controls the speed to 30 mph. Speed
depends on rear sprocket ratio and weight of rider.
Skills And Experience:
The buyer may need some basic hardware skills,
tools, and it takes roughly around 2-3 hours to install and to do some
adjustments and fine tuning.
Notices And Disclaimer:
We cannot guarantee that this kit will fit your
specific individual bike(s).
Due to California Air Resource Board (CARB) regulations
we cannot sell to California Residence at this time.
Operating a bike, motorized bicycle or bike with a
bicycle engine kit installed involves some risk of serious bodily injury.
Buyer accepts responsibility for any and all vehicle operation that may
lead to personal injury, economic loss, social distress, other losses,
costs and damages.
Seller is not responsible for injuries and/or damages
resulting from operating this motorized bicycle or bicycle engine kit.
Seller is not responsible for misuse of this kit or any
warranty after installation.
Not all motorized bicycles are allowed for on road use.
We make no guarantee as to the road legality of these