Stainless Steel Fret Rocker Luthier Guitar Tool


Stainless Steel  Fret Rocker Luthier Guitar Tool

This item has been shown 30527 times.

Buy Now

Stainless Steel Fret Rocker Luthier Guitar Tool :
$8


STAINLESS STEEL FRET ROCKER

The most efficient way to check whether your frets are level. Uneven frets are the prime cause of unwanted buzzing.

The TECHNOFRET Fret Rocker is an indispensable tool both for guitar techniciansand guitar players.

Manufactured from 2.00 mm thick stainless steel with a polished mirror finish, four straightedges of differing length in one tool allow the operative to span every set of three adjacent fretsall the way from the first three frets on a 34" scale bass to the top three frets on a 24.65" scale guitar.

By laying the Fret Rocker along three frets and gently rocking it, it can be instantly determined whether any of the frets are higher or lower than they should be, and steps can then be taken to remedy the situation, either byfractionally raising (and gluing) a low fret, or by tapping down, and if necessary filing,a high fret.

In use, you would test it alongside each string while the instrument is strung to pitch, as frequently the frets can be OK for five strings and exhibit a slight rock at one string.

The straight edges are so accurate that discrepancies in fret height of well under a thousandth of an inch can be instantly felt and detected.

Each rocker is precision cut by CNC waterjet , then ground and lapped to an unprecedented level of straightness, and individually tested before being dispatched.

ALL OTHER FRET ROCKERS IN THIS PRICE BRACKET ARE STAMPED OUT OF SHEET MATERIAL ... THEY ARE NOT INDIVIDUALLY LAPPED FOR STRAIGHTNESS ... BUYING A SUBSTANDARD FRET ROCKER IS A WASTE OF MONEY ... BUY THETECHNOFRETFRET ROCKER AND BE ASSURED OF A HIGH PRECISION TOOL.

This is an extremely useful accessory for guitar players, especially when buying a new instrument - test the guitar in the store and make sure you are getting an accurately fretted instrument. Also great for periodically monitoring the condition of your frets to determine if you need a professional fret job.

At a bargain price of £7.99, thisprecision toolbelongs in every guitar case.



Stainless Steel Fret Rocker Luthier Guitar Tool :
$8

Buy Now



25strip Luthier Purfling Binding Marquetry Inlay 810x6x1.5mm Guitar Parts #113j picture
25strip Luthier Purfling Binding Marquetry Inlay 810x6x1.5mm Guitar Parts #113j


100 Dots Inlay Gold Mother Of Pearl 7mm X 1.5mm Thickness picture
100 Dots Inlay Gold Mother Of Pearl 7mm X 1.5mm Thickness


1 Oz Inlay Material Heart Abalone Shell Blanks 0.75mm Thickness #03 picture
1 Oz Inlay Material Heart Abalone Shell Blanks 0.75mm Thickness #03


Fantasy Bass Clef Inlay In Gold Mother Of Pearl 1.5mm Thickness picture
Fantasy Bass Clef Inlay In Gold Mother Of Pearl 1.5mm Thickness


1 Oz Inlay Material Gold Mother Of Pearl Shell Blanks 1.5mm Thickness #3 picture
1 Oz Inlay Material Gold Mother Of Pearl Shell Blanks 1.5mm Thickness #3


100 Dots Inlay Gold Mother Of Pearl 6mm X 1.5mm Thickness picture
100 Dots Inlay Gold Mother Of Pearl 6mm X 1.5mm Thickness