Advanced Analog Mg-1.1 Air Bearing Linear Tracking Tonearm New
This item has been shown times.
Advanced Analog Mg-1.1 Air Bearing Linear Tracking Tonearm New:
The price changed on the listingwas because increased to 200% of thefinal sales fee.
Up for sale are brand new, the latest model oflow air pressureair bearing-designed Advanced Analog MG-1MK1 Linear Tracking Tone arms.The MG-1 air bearing linear trackingtonearm is unique becauseit uses precision build with clear anode 6061 aluminum air beam and float sleeve to ensure the accuracy of air rail quality of construction and further to reduce the arm resonance to ensure the quality of play back as well. The detachable head-shell was made by non-resonance fiber composite. Its high rigidity and reliable construction quality is easy to maintain the cartridgeand Azimuth adjustment. If you own more cartridges than just one, youmay order the optional extra slide arm wand for your second or third. Cartridges have quick and convenient cartridge-changes and complete set up wellwithin just 30 SECONDS.
Most advanced newly design Digital Read Out feature has provide the MG-1 has convenient adjustment for each cartridge to get its perfect V.T.A. level without guess. This function also gives you a readable quantification on your VTA adjustment at barely minimum at 0.0005"(0.01mm). The V.T.A. can be adjusted by simply turning a knob. You can actually listen to the difference tracking angle makes and compare immediately. You can actually make the changes while an LP is in play if your hand is steady.
High rigid non resonance carbon fiber composite bound a 7075 aluminum core arm tube with newly design fiber composite heads-hell. Its strong and high rigidity structure benefited fast reaction response on tracking ability. And provide a detailed with airy tone on full frequency of play back.
Convenient and secured V.T.F. adjust construct for quick and accurate V.T.F. adjustment. This design also features an custom extra add on weight for suit varied cartridge weight.
Reliable arm rest build by black anode processed 7075 aluminum construction. It Provide a certain distance to ensure your cartridge is well parked and that it is safe when replacing vinyl.
Simplest installation. There's only one 1/4" drill required for install MG-1. The total installation period will not beover 15 minutes. It also contains 3 ease of level adjust cone screw to ensure the required absolute level position.
There's a lot more features that can be found at www.adanalog.com. All these features make MG-1 MK1air bearing linear tracking tonearm to reach the highest performance on records play back. And it provides a varied cartridge adjustment with convenience.Other Features
- Low mass slide arm tube for only 26 gram without cartridge and counter weight.
- Carbon fiber bonded to a precision 7075 aluminum (0.005") core arm tube.
- Low air pressure operation: (minimum requirement: 2 PSI with 15 LPM).
- Continuous VTA adjustment (range around 35MM/1.4").
- Accurate counter weight adjustment with a single add on weight screw for optimum performance with most cartridges.
- Standard VTA Digital Read Out (DRO) kit. accuracy 0.01mm.repeatable 0.02mm.
- Optional slide arm tube at extra cost , for a quick convenient cartridge change within 30 seconds. please e-mail for detail.
- Optional damping trough (see NOTE 1)
- Optional high quality low noise level high flow rate Alita AL-15A air pump (UL CSA approved) available at extra $150.00 ($160.00 230 v)USD on total.
6 Month Parts and 1 Year Labor FREE WARRANTY.
NOTE 1: A damping trough can or likely will cause damage to your cartridge when used improperly by an individual without proper experience and expertise with these
NOTE 2: A pump is required for operation of the MG-1, but the tone arm can be purchased without purchasing the optional pump we offer. The price does not include a necessary pump.
NOTE 3: Warranty starts ondelivery day.
NOTE 4: Warranty is non-transferable.
NOTE 5: Shipping & handling will be charge on extra.
NOTE 6: The limited warranty provided is on the tone-arm only. Physical damage to the tone arm is not covered.
The MG-1 is a hi tech air-bearing tone arm, and should operated by someone personally familiar with this type of equipment to avoid irrevocable damage. Damage to any cartridges is not covered under the warranty.
NOTE 7: The cartridge shown in the photosIS NOT included.
- Item willship out within5 business days after the payment isreceived.
- Will ship by track-able Fedex or USPS Priority mail from GA 30024 U.S.A.
- We accept Paypal , M/O, And More... e-mail me for details!
PLEASE READ BEFORE offerDING:
Everything that is included in the sale is described above. If there is no indication whether something is included.
Please do not assume it is. Always ask us a question before offerding. Unless specifically stated.
Payment must be made within
5 days of the end of sale.
Important Announcement : If you pay through PAYPAL
I will ship to "Paypal CONFIRMED" or "Paypal VERIFIED" address.
Return is welcomed. All return must complete within 30 days of sale end and all item must in original (unused) condition. 15% restocking fee may apply for cover shipping cost if free shipping was offered.
Shipping cost is non-refundable.
My other items
Thanks for looking !
audio research turntable cartridge tonearm air bearing et marantz krell mcintosh tube amp