Complete Airbrush Cake Decorating Set - 4 AmeriMist Colors
Complete cake and food decorating starter kit with low-noise mini compressor, premium airbrush, and 4 AmeriMist food colors.
Compact and quiet air supply. Includes operating manual, and detachable, 6' nylon air hose. Delivers approximately 25 psi of air pressure (0.4 CFM). Operates on 12 volts DC using the AC wall adapter provided. Designed for intermittent use; requires a cool down period of 15 minutes after 30 minutes of continuous operation. Oil-less and maintenance-free. Rubber feet protect your work surface and minimize vibration. Dimensions: 4.5" x 4" x 2". Model: Elite-55E from PointZero Airbrush.
The PZ-270, from PointZero Airbrush, is a premium, dual-action (trigger independently controls release of both air & fluid; pressing trigger releases air, pulling back releases material), internal-mix airbrush. Precision-crafted body provides a balanced feel in the hand. Tight-tolerance head provides extremely fine atomization with razor-sharp detail. Needle backstop at the rear of the airbrush allows you to pre-set the trigger travel; helping produce consistent line widths. Fine-finish, stainless-steel needle minimizes tip-dry. Solvent-resistant needle packing allows safe use with all types of spraying mediums. Pre-installed 0.2mm nozzle (tip), nozzle cap, needle, and removable needle cap for a spray pattern between hairline and 1". Gravity-feed 2cc color cup; won't obstruct your view during fine detail work. Boxed set also includes a barbed hose connector, paint pipette, nozzle wrench and instruction sheet.
AmeriMist spray-on, premium airbrush food-coloring set from Americolor. These highly concentrated colors are perfect for food decorating and cake designing. Superior coverage, even on hard-to-color, non-dairy whipped toppings and icings. Eliminates the need to over-apply, preventing water spots and icing break-down. Four included colors are Holiday Red, Leaf Green, Lemon Yellow & Sky Blue. Each bottle contains 0.7 ounces. Non-toxic and made in the USA.
Set of five brushes on a removable ring. Used for cleaning airbrush equipment. Stainless-steel brush handles are 4" long. Nylon brush heads are five different sizes, ranging in diameter from 1/16" to 1/4" (bristle heads are approximately 1" long). Packaged in a vinyl storage pouch.
PointZero Elite-55E air compressor with hose, PZ-270 airbrush with accessories as described, 4 bottles of sprayable food color, and cleaning brush set.
FAST SHIPPING: We offer free rush-processing on every order.
Almost all orders paid by 2pm Eastern Standard Time ship the same business day.
PREMIUM QUALITY: All items are 100% brand-new and first-quality, unless the listing states otherwise. We never sell factory seconds or
refurbished items as new.
30-DAY RETURN POLICY: Purchase with complete confidence; we
offer easy, no-hassle returns. For complete details please visit the page entitled
"Return and Warranty Policy" within our store.
ABOUT US | PAYMENTS | SHIPPING | TERMS OF SALE | THREAD SIZE GUIDE | CONTACT INFO
Imagination is a passion that flows within every artist. Being a family-owned, American business, PointZero shares your passion. We strive to bring you exceptional products that transform your imagination into reality. PointZero components are crafted to our specifications in the same worldwide factories and production centers as some of the world's largest airbrush brands. All items are shipped directly from our warehouse in Florida, and our customer service is second to none. We look forward to creating a lasting relationship with you. Thank you for using our products.
Click here to add us as a favorite seller.
PayPal is preferred. Cash is accepted for items picked up locally at our Fort Lauderdale, Florida warehouse. Purchases must be paid for within 5 days, or the sale will be canceled and item will be re-listed. If you need longer, please let us know prior to purchasing and we will be happy to accomodate you.
If your cleared payment is received prior to 2pm Eastern (GMT-5) on a business day, our goal is to pick, package and ship your order that day. Domestically (Continental U.S. delivery), items weighing less than a few pounds usually are sent USPS First Class or Priority, and heavier items usually ship via UPS Ground. Internationally, most items are shipped through the United States Postal Service (USPS). Import duties, taxes, charges and brokerage fees (typically collected upon delivery or pickup) are the buyers responsibility and are not included in the items price or shipping charges. Please check with your countrys customs office prior to purchasing to determine these costs, and to ensure the item is legal in your country. For all orders, we reserve the right to choose the shipping carrier and class.
DISCLAIMERS, WAIVERS AND INDEMNITY: By placing a offer / purchasing this or any other product (Item) from Seller or Sellers affiliates (collectively known as Seller), no matter in which venue or location the sale is consummated, you (Purchaser) represent that you are of legal age (18 years or older) to use this Item, enter into this agreement, and become bound by its terms. There are inherent risks involved in using any product, even while using protective equipment (which Purchaser is responsible to investigate and obtain), including but not limited to: serious physical injury, and possibly death. Purchaser acknowledges that Seller is neither the manufacturer of this Item nor an agent of the manufacturer. Purchaser waives all liability of Seller and claims against Seller for damages, losses, costs, injuries, penalties, expenses, attorneys fees and liabilities of whatever nature whether in tort, contract, warranty or strict liability, including without limitation those resulting from injuries or deaths of persons and damages to property resulting from, or arising out of or in connection with the use of this Item, loss or liability resulting from negligence, operational deficiencies or failures, acts of God, or other cause (whether such causes are avoidable or not) caused in whole or in part, directly or indirectly by Purchaser, Seller's employees, representatives, agents or third parties (collectively, "specified claims"). Under no circumstances is Seller responsible for special, indirect, incidental or consequential damages, even if Purchaser has been advised of their possible existence. Purchaser agrees to indemnify, defend and hold Seller harmless from and against any and all specified claims. Seller hereby disclaims all claims, express and implied, with respect to this Item, including without limitation, any implied warranties of merchantability, fitness for a particular purpose, or that the Item is free from latent defects. Purchaser has had the opportunity to contact Seller to ask any questions regarding this Item prior to purchase. Item is sold in its current as/is condition as described subject only to warranty for repairs if offered. Purchaser knowingly and freely assumes all risks of ownership and use, known and unknown. If Purchaser loans, re-sells, gifts, or transfers the Item, Purchaser will obtain transferees agreement of all the terms contained herein. Should any legal cause of action arise, the Buyer agrees to defend Seller, and hold harmless, and forever release the seller, from any and all legal liability. Some photographs may not be to scale; please refer to product description for item sizing. All product pictures, illustrations, ad copy, and item descriptions are original creative works and may not be duplicated. Copyright 2010. PURCHASER WARRANTS THAT THEY HAVE READ, UNDERSTOOD, AND ACKNOWLEDGE THAT THEY HAVE GIVEN UP SUBSTANTIAL RIGHTS BY THIS AGREEMENT, AND AGREE TO THESE TERMS FREELY AND VOLUNTARILY WITHOUT ANY INDUCEMENT.
This guide explains some of common fitting sizes you may encounter while shopping for airbrush equipment.Airbrush fittings are normally identified by 3 things; size, thread-type and end-type.
The first confusing point is the size isn't really the size. Fittings are named after their "nominal" size, not their actually measured size. Originally, the "nominal" size was supposed to be the inner diameter (ID) of the pipe used to make the fitting. However, if 2 different factories used pipes with different wall thicknesses, then parts from the 2 makers wouldn't fit with each other. So an agreement was reached, where everyone would make the threaded portion (the important part) a standard size, and name the fitting by its "nominal" size. Because of this, the nominal size quoted for a fitting usually won't match the the actaully measured diameter inside or outside the fitting. In fact, to determine the actual size of a fitting when given the quoted (nominal) size, you need to refer to a chart for that thread type. There are some shortcuts; for example, with a BSP thread-type, you can add 1/4" to the nominal size to get the actual size. Therfore, a 1/8" fitting will actully measure 3/8" in diameter across the threaded portion, and a 1/4" fitting will measure 1/2". This shortcut only applies to BSP fittings, which brings us to discuss thread types.
The most popular airbrush thread type found worldwide is the BSP, which is an acronym for "British Standard Pipe" (thread). This thread is used by many of the top brands including PointZero, Iwata, Olympos, Grex, Precision, Harder & Steenbeck and RichPen. Normally the thread type is identified after the size, such as 1/8" BSP (1/8" is the nominal size, and BSP is thread type). This is where things get tricky again. Some thread types have multiple names. If you look at the air inlet on most airbrushes you can see that the fitting looks like a small threaded cylander, it does not taper to a cone-shape. This is called a "parallel" thread, as opposed to a "taper" thread. A parrallel BSP thread is also called a "BSPP" or a "G" thread, which both indicate the same thing; a non-tapering BSP thread. Also, certain thread types are common to a particular industry, so dealers will sometimes leave the thread type un-named, expecting that you will know what thread type is used. So a 1/8" BSP fitting can be called: 1/8" BSP, 1/8" BSPP, 1/8" G, or simply 1/8", leaving you to assume that it's a BSP. In most cases, if the fitting is un-named and it's airbrush specific equipment, the fitting will be BSP. This rule does not apply to common air compressors, or larger spray guns, which may use NPT "National Pipe Thread" fittings. Other thread sizes possibly encountered may be M5x0.45mm used by Badger & Revell, M7x0.75mm used by EFBE, 1/4"-40 used by Paasche, and 3/8"-32g used by Aztec or Devilbiss.
Finally, let's discuss two common end-types (also called genders); male and female. Male fittings have external threads, meaning the threads are visible on the outside of the fitting. Female fittings have internal threads, meaning the threads are located on the inside of the fitting. Male fittings are designed to thread-into, or mate, with female fittings.
Putting it all together
To make a connection and join two fittings together, the size and thread-type must match and the end-type must be opposites. For example, a 1/8" BSP male will hapily mate with a 1/8" BSP female, but a 1/8" and 1/4" fitting will not join, nor will a BSP and NPT fitting, and definatly not a 1/8" BSP and 1/4" NPT. Adaptors are available and can convert sizes, thread-types and end-types to enable these fittings to work together.
Fast response to emailed questions! The easiest way to reach us is through 's "Ask a Question" link located near the bottom of every listing.
IndexCardFlexTabs from Shipscript
This item has been shown 14045 times.
Airbrush Food Cake Decorating Kit 4 Color Supplies Set: $55