Starter Kit Deluxe With Arduino Uno From Oddwires


Starter Kit Deluxe With Arduino Uno From Oddwires

This item has been shown 17600 times.

Buy Now

Starter Kit Deluxe With Arduino Uno From Oddwires:
$100


Arduino Uno Starter Kit Deluxe - includes a Genuine Arduino Uno - we are an Authorized Arduino Distributor

This is our best value Kit that includes everything from our regular Starter Kit, plus:

  • a NEMA17 stepper motor,
  • a Stepper Motor Controller,
  • and a Metal Gear Servo

And (everything from our Pro Kit):

  • Ultrasonic distance measuring sensor
  • 433 MHz transmitter/Receiver pair
  • LCD Display
  • Real Time Clock Module,
  • TSOP4838 Infrared receiver, TSAL7400
  • Infrared LED, Phototransistor, an
  • RGB LED.
Compared to alternative Kits: OddWires offers more value, high quality components and a great way into all the fun and creativity that's made possible by Arduino. over 100 items enabling you to perform a huge range of tutorials from the Arduino site (see below).
(Note that the Arduino packaging has recently changed. You may receive either of the packages shown in the main picture or the individual Uno image)

Includes:

  • Arduino Uno - the latest version to power your projects (R3)
  • 433 MHz transmitter/receiver
  • LCD Display - May be blue or green depending on inventory
  • Real Time Clock Module
  • TSOP4838 Infrared Receiver
  • TSAL4700 Infrared LED
  • Phototransistor
  • RGB LED
  • NEMA17 Stepper Motor
  • Stepper motor controller
  • Metal gear servo
  • Ultrasonic distance measuring sensor
  • USB cable
  • 400 point breadboard for rapid prototyping without soldering
  • Perfect premium jumper wire pack - combinations female/male, male/male in 6"/10" lengths (40 wires)
  • 3 x 3 mm red LEDs
  • 3 x 3 mm yellow LEDs
  • 3 x 3 mm ultra-bright blue LEDs
  • 3 x 3 mm green LEDs
  • 3 x 5 mm red LEDs
  • 3 x 5 mm green LEDs
  • 3 x 5 mm ultra-bright blue LEDs
  • 3 x 5 mm ultra-bright white LEDs
  • 5 x Tactile switches
  • 5 x 22pF ceramic disc capacitors
  • 5 x .1uF ceramic disc capacitors
  • 3 100uF electrolytic capacitors
  • Latching on/off switch
  • 9V battery case with 2.1mm plug for Arduino
  • 2 x high quality cermet type 10K ohm trimmer potentiometers
  • 10 220 ohm resistors
  • 10 10K resistors
  • 10 1K resistors
  • 5 2N2222 transistors
  • Light dependent resistor (CdS cell)
  • Thermistor
  • Piezo buzzer
  • 1 x 40 pin male header
Tutorials

Here is a comparison of oddWires Starter Kits and links to the Arduino tutorials. You can see that even the basic kit enables you to do a lot. But the real fun starts with the Pro which adds a whole bunch of fun with a 433 MHz transmitter/receiver module, LCD Display, Real Time Clock Module, TSOP4838 Infrared Receiver, TSAL4700 Infrared LED, Phototransistor and RGB LED.

Then the Deluxe adds the stepper motor & motor controller and the metal gear servo for all those exciting active projects.

1.Basics Starter Pro Deluxe BareMinimum: The bare minimum of code needed to start an Arduino sketch. ✓ ✓ ✓ Blink: Turn an LED on and off. ✓ ✓ ✓ DigitalReadSerial: Read a switch, print the state out to the Arduino Serial Monitor. ✓ ✓ ✓ AnalogReadSerial: Read a potentiometer, print it's state out to the Arduino Serial Monitor. ✓ ✓ ✓ Fade: Demonstrates the use of analog output to fade an LED. ✓ ✓ ✓ ReadAnalogVoltage : Reads an analog input and prints the voltage to the serial monitor 2.Digital Blink Without Delay: blinking an LED without using the delay() function. ✓ ✓ ✓ Button: use a pushbutton to control an LED. ✓ ✓ ✓ Debounce: read a pushbutton, filtering noise. ✓ ✓ ✓ Button State Change: counting the number of button pushes. ✓ ✓ ✓ Input Pullup Serial: Demonstrates the use of INPUT_PULLUP with pinMode(). ✓ ✓ ✓ Tone: play a melody with a Piezo speaker. ✓ ✓ ✓ Pitch follower: play a pitch on a piezo speaker depending on an analog input. ✓ ✓ ✓ 3.Analog AnalogInOutSerial: read an analog input pin, map the result, and then use that data to dim or brighten an LED. ✓ ✓ ✓ Analog Input: use a potentiometer to control the blinking of an LED. ✓ ✓ ✓ AnalogWriteMega: fade 12 LEDs on and off, one by one, using an Arduino Mega board. ✓ ✓ ✓ Calibration: define a maximum and minimum for expected analog sensor values. ✓ ✓ ✓ Fading: use an analog output (PWM pin) to fade an LED. ✓ ✓ ✓ Smoothing: smooth multiple readings of an analog input. ✓ ✓ ✓ 4.Communication These examples include code that allows the Arduino to talk to Processing sketches running on the computer. For more information or to download Processing, see processing.org. ReadASCIIString: parse a comma-separated string of ints to fade an LED ✗ ✓ ✓ ASCII Table: demonstrates Arduino's advanced serial output functions. ✓ ✓ ✓ Dimmer: move the mouse to change the brightness of an LED. ✓ ✓ ✓ Graph: send data to the computer and graph it in Processing. ✓ ✓ ✓ Physical Pixel: turn a LED on and off by sending data to your Arduino from Processing or Max/MSP. ✓ ✓ ✓ Virtual Color Mixer: send multiple variables from Arduino to your computer and read them in Processing or Max/MSP. ✓ ✓ ✓ Serial Call Response: send multiple vairables using a call-and-response (handshaking) method. ✓ ✓ ✓ Serial Call Response ASCII: send multiple variables using a call-and-response (handshaking) method, and ASCII-encode the values before sending. ✓ ✓ ✓ SerialEvent: Demonstrates the use of SerialEvent(). ✓ ✓ ✓ Serial input (Switch (case) Statement): how to take different actions based on characters received by the serial port. ✓ ✓ ✓ 5.Control Structures If Statement (Conditional): how to use an if statement to change output conditions based on changing input conditions. ✓ ✓ ✓ For Loop: controlling multiple LEDs with a for loop and. ✓ ✓ ✓ Array: a variation on the For Loop example that demonstrates how to use an array. ✓ ✓ ✓ While Loop: how to use a while loop to calibrate a sensor while a button is being read. ✓ ✓ ✓ Switch Case: how to choose between a discrete number of values. Equivalent to multiple If statements. This example shows how to divide a sensor's range into a set of four bands and to take four different actions depending on which band the result is in. ✓ ✓ ✓ Switch Case 2: a second switch-case example, showing how to take different actions based in characters received in the serial port. ✓ ✓ ✓ 6.Sensors Ping: detecting objects with an ultrasonic range finder. ✗ ✓ ✓ 7.Display Examples of basic display control LED Bar Graph: how to make an LED bar graph. ✓ ✓ ✓ 8.Strings StringAdditionOperator: add strings together in a variety of ways. ✓ ✓ ✓ StringAppendOperator: append data to strings. ✓ ✓ ✓ StringCaseChanges: change the case of a string. ✓ ✓ ✓ StringCharacters: get/set the value of a specific character in a string. ✓ ✓ ✓ StringComparisonOperators: compare strings alphabetically. ✓ ✓ ✓ StringConstructors: how to initialize string objects. ✓ ✓ ✓ StringIndexOf: look for the first/last instance of a character in a string. ✓ ✓ ✓ StringLength & StringLengthTrim: get and trim the length of a string. ✓ ✓ ✓ StringReplace: replace individual characters in a string. ✓ ✓ ✓ StringStartsWithEndsWith: check which characters/substrings a given string starts or ends with. ✓ ✓ ✓ StringSubstring: look for "phrases" within a given string. ✓ ✓ ✓ LiquidCrystal Library Hello World: displays "hello world!" and the seconds since reset. ✗ ✓ ✓ Blink: control of the block-style cursor. ✗ ✓ ✓ Cursor: control of the underscore-style cursor. ✗ ✓ ✓ Display: quickly blank the display without losing what's on it. ✗ ✓ ✓ TextDirection: control which way text flows from the cursor. ✗ ✓ ✓ Scroll: scroll text left and right. ✗ ✓ ✓ Serial input: accepts serial input, displays it. ✗ ✓ ✓ SetCursor: set the cursor position. ✗ ✓ ✓ Autoscroll: shift text right and left. Servo Library Knob: control the shaft of a servo motor by turning a potentiometer. ✗ ✗ ✓ Sweep: sweeps the shaft of a servo motor back and forth. ✗ ✗ ✓ Stepper Library Motor Knob: control a highly accurate stepper motor using a potentiometer. ✗ ✗ ✓ Other

Arduino Capacitance Meter

✓ ✓ ✓ Arduino Stopwatch ✓ ✓ (Note that the Arduino packaging has recently changed. You may receive either of the packages shown in the main picture or the individual Uno image)

Starter Kit Deluxe With Arduino Uno From Oddwires:
$100

Buy Now



Tesla Steampunk Mechanical Mod Copper+battery+charger+tobh Atty V2 Rda picture
Tesla Steampunk Mechanical Mod Copper+battery+charger+tobh Atty V2 Rda


Tesla Steampunk Mechanical Mod Copper+battery+charger+tobh Atty V2 Rda picture
Tesla Steampunk Mechanical Mod Copper+battery+charger+tobh Atty V2 Rda


Tesla Steampunk Mechanical Mod Copper+battery+charger+tobh Atty V2 Rda picture
Tesla Steampunk Mechanical Mod Copper+battery+charger+tobh Atty V2 Rda


Wood Cherry Bomber Mechanical Mod, Box Mod+imren Batteries+charger+doge V2 Rda picture
Wood Cherry Bomber Mechanical Mod, Box Mod+imren Batteries+charger+doge V2 Rda


Aircraft Ads-b Radar Tracking Kit - Receiver, Gps Dongle & Antenna picture
Aircraft Ads-b Radar Tracking Kit - Receiver, Gps Dongle & Antenna


Blackhawk By Mcv picture
Blackhawk By Mcv