Bb Korn Indianapolis Real Gas Powered Engine & Supercharger


Bb Korn Indianapolis Real Gas Powered Engine & Supercharger

This item has been shown times.

Buy Now

Bb Korn Indianapolis Real Gas Powered Engine & Supercharger:
$2,825


HERE WE HAVE A CONTEMPORARY REAL GAS POWERED B B KORN INDY TETHER RACE CAR WITH A REAL SUPERCHARGER.

THIS CAR WAS ORIGINALLY CONSTRUCTED USING ORIGINAL BLUEPRINTS OF BARNEY’S 1930’S STYLE RACE CAR AND RESEMBLES THE ORIGINAL B B INDY CAR DOWN TO THE SMALLEST DETAILS.THE SEAT & TRIM ARE MADE OF REAL LEATHER. IT HAS BEEN ALL HAND BUILT USING RECYCLED AND POLISHED ALUMINUM & BRASS UP FOR sale IS WHAT STARTED AS AN A&M B B KORN INDIANAPOLIS STATIC DISPLAY MODEL AND HAND MADE INTO A GAS POWERED EDCO, FUNCTIONING SUPERCHARGER TETHER RACE CAR CUSTOM MODIFIED FOR RACING or SHOW HERE IN THE USA FOR YOU COLLECTORS THAT ALWAYS WANTED A POWERED B B KORN INDY CAR AND COULD NOT AFFORD THE $15,000 AND UP PRICES THAT THESE CARS ARE DEMANDING, HERE IS YOUR CHANCE TO OWN A BEAUTIFUL FULLY HAND MACHINED B B KORN INDIANAPOLISWITH A FUNCTIONALSUPERCHARGER THAT HAS BEARINGS NO PARTS ON THIS CAR HAVE BEEN MADE WITH AUTOMATICCNCMACHINES. THEY WERE ALL MADE BY HAND BY A RETIRED MACHINIST WHO TAKES GREAT PRIDE IN HAND MAKING WHAT CAN BE CONSIDERED A ONE OF A KIND RACE CAR THIS CAR WAS ORIGINALLY MADE FOR STATIC DISPLAY HAS BEEN TOTALLY HAND MACHINED. THE GEAR BOX HAS R-6 BEARINGS AT BOTH ENDS OF THE UNIT WITH A SHOULDERED BEARING ON THE PINION SHAFT ENGINE SIDE AND ALSO A BRASS SLEEVE RUNNING FROM THE BEARING TO THE PINION GEAR IN THE GEAR BOX TO SUPPORT THE PINION SHAFT THAT IS MADE OF STEEL. IT HAS BEEN FITTED WITH A SET OF BOSTON L -147 RING & PINION GEAR SET EACH GEAR HELD IN PLACE (4) SET SCREWS TO ASSURE NON MOVEMENT OF THE GEARS & A SPECIAL COLLAR TO LOCK TOLERANCE END PLAY ON THE MAIN AXLE --- THE GEAR BOX HAS ALSO BEEN FITTED WITH A .064 BRASS COVER STAMPED WITH THE MAKERS INITIALS SMC AND THE SERIAL NUMBER OF THE CAR----THE SERIAL NUMBER OF THE CAR IN THIS sale IS SERIAL #2 EACH CAR IS HAND STAMPED AT 4 PLACES WITH ( SMC & SERIAL NUMBER OF CAR ) 1.INSIDE THE GEARBOX UNDER THE RING GEAR2.INSIDE THESUPERCHARGER ON EACH HALF3.ON THE REAR AXLE CASTING IN THE BACK4.ON THE BRASS GEAR BOX COVER EACH CAR CAME WITH A SOLID CAST NON-WORKING BLOWER. THIS CASTING WAS HAND CUT IN HALF AND MACHINED AND FITTED WITH TWO BEARINGS ONE IN EACH HALF, AND A .125 NAVAL BRASS SHAFT FITTED WITH AN ALUMINIUM IMPELLER MADE OF 2024 T-4 AIRCRAFT GRADE ALUMINUM AND A DRIVE PULLY THAT IS FITTED TO THE 2.250” OD BRASS FLYWHEEL TO DRIVE THE BLOWER THAT IS NOW FULLY FUNCTIONAL. MOST TETHER CARS DO NOT HAVE THIS FEATURE, BUT THIS ONE DOES. PLEASE LOOK AT ALL PHOTOS OF THESUPERCHARGER SYSTEM AND HAND FABRICATED SYSTEM TO PIPE THE AIR TO THE LARGE VENTURI OF THE EDCO MOTOR USED IN THIS APPLICATION THIS CAR HAS ALSO BEEN FITTED WITH SOLID ALUMINUM WHEELS AND REAL RUBBER FIRESTONE TIRES THAT CAN BE RUN ! THE REAR AXLE HAS BEEN MACHINED AND METRIC STUDS RE- FITTED WITH ¼-28 STAINLESS STUDS TO CARRY THE REAR WHEELS AND TIRES THAT MATCH THE FRONT WHEELS & TIRES THE FUEL TANK HAS BEEN MADE FUNCTIONAL BY SOLDERING TUBING INTO THE TWO HOLES AT THE TOP OF THE TANK TO FILL IT AND ALSO NEW OLD STOCK FUEL LINE RUN FROM THE BOTTOM OF THE TANK TO THE EDCO VENTURI THE REPRODUCTION EDCO ENGINE IN THIS CAR WAS DESIGNED BY IRA J. HASSAD A WELL KNOW TETHER CAR ENGINE AND RACE CAR BUILDER.EACH CAR HAS BEEN CUSTOM FITTED WITH A NEW OLD STOCK REPRODUCTION EDCO IGNITION ENGINE MADE BY T & D RESEARCH ASSOCIATES, SAN DIEGO, CA. IT IS COMPLETE WITHA 2.250 OD BRASS FLYWHEEL THAT IS CROSS DRILLED AND FASTENED TO THE CRANKSHAFT WITH AN 8-32 SET SCREW & ALSO HELD IN PLACE WITH A ¼-28 HEX DRIVE CUSTOM COUPLER TO THE FLYWHEEL. THIS EDCO ENGINE ALSO COMES WITH STATIONARY & MOVING POINTS. IT SHOULD BE NOTED THAT EACH MOTOR IS EQUIPPED WITH A GLOW PLUG SINCE TODAY NOT MANY TETHER CARS ARE RUN ON IGNITION. HOWEVER, IF YOU PREFER, YOU CAN ADD THE CONDENSOR, COIL AND BATTERY AND MAKE IT A TRUE IGNITION CAR SINCE THE COMPLETE IGNITION POINT ASSEMBLY ISALREADY ON THIS MOTOR. THESE CARS ARE BEING HAND MADE IN LIMITED QUANITY. IF YOU ALWAYS WANTED A REAL GAS POWERED B. B. KORN INDIANAPOLIS CAR AND COULD NOT AFFORD THE 15K TO 25K PRICE FOR ONE, HERE IS YOUR OPPORTUNITY TO BUY ONE AT A FRACTION OF THE COST. CONSIDERING ALL THE PARTS, HAND WORK, CUSTOM PARTS AND MACHINE SHOP TIME, THERESERVE PRICEIS VERY REASONABLE. I COULD ONLY PUT 12 PHOTOS ON THE sale SITE BUT IF YOU WOULD WANT A SPECIAL PHOTO PLEASE EMAIL ME AND I WILL EMAIL YOUMORE PHOTOS OR ANSWER ANY QUESTIONS THAT YOU MIGHT HAVE ABOUT THIS HIGH QUALITY CONVERSION GAS POWERED RACE CAR. IF YOU ARE LOOKING FOR A HEIRLOOM FOR YOUR FAMILY TO PASS DOWN FROM GENERATION TO GENERATION THIS IS A GREAT INVESTMENT AND A HAND CRAFTED GAS POWERED CAR TO ADD TO YOUR COLLECTION. DISCLAMER THE SELLER OR BUILDER OF THIS FULLY GAS POWERED TETHER CAR IS NOT RESPONSIBLE FOR ANY INJURY OR DAMAGE IT MAY CAUSE YOU OR ANYONE ELSE WHILEIN A STATIC STATE, ORWHEN RUNNING OR STARTING THE CAR. THERE IS A LIMITED WARRANTY OF 90 DAYS FROM DATE OF SALE ON THE MACHINE WORK THAT BUILDER PREFORMED ON THIS MODEL. SINCE SMC DID NOT MAKE THE CASTINGS OR OTHER PARTS OF THIS MODEL CAR, WE WILL ASSUME NO LIABILITY FOR ANY DEFECTS IN THE MATERIAL OR WORKMANSHIP ON PARTSTHAT WE DID NOT MAKE. SMC ONLY MODIFIED SOME OF THE PARTS, WE DID NOT CAST THEM. AS WITH JUST ABOUT ANY PART IN THE RACING WORLD, THESE ITEMS ARE SOLD "AS IS". TERMS OF sale PAYMENT IN FULL IS DUE WITHIN 3 DAYS FROM END OF sale. EXTRA CONSIDERATION WILL BE GIVEN TO THOSE THAT PAY BY POSTAL M O’S. OR OTHER FORMS ASTHEY AREPREFERRED FOR PAYMENT.HOWEVER WE WILL ACCEPT PAYPAL IF THAT IS THE ONLY WAY YOU CAN PAY.( & PAYPAL & USPS/FED EX)CHARGES ATOTAL 400-450) FOR THIS ITEM.WE UNDERSTAND THAT IF YOU ARE PAYING BY M O THAT IT MAY TAKE MORE THAN 3 DAYS FOR FULL PAYMENT TO ARRIVE. PLEASE ADVISE HOW AND WHENYOU WILL PAY AT sale'S END. SHIPPING TIME WILL VARY DEPENDINGON YOUR LOCATION. FOREIGN COUNTRY buyers MUST CONTACT MEPRIOR TOofferDING, OR YOUR offer WILL BE CANCELLED. SINCE THIS ITEM IS ALSO AVAILABLE LOCALLY FOR SALE,I RESERVE THE RIGHT TO END THIS sale IN THE EVENT THAT IT SELLS PRIOR TO sales ENDING. PLEASE EMAIL ALL QUESTIONS BEFORE offerDING or YOU MAY CONTACT ME AT 813 938 5250.ALL APPLICABLE SALES TAXES WILL BETHE BUYER'S RESPONSIBILITY AND ACCORDING TO YOUR OWNSTATE LAWS. THANK YOU FOR LQQKING AT MY sale ! SHOPRAT

On May-08-13 at 01:40:05 PDT, seller added the following information:

IT SHOULD BE PLAINLYNOTED THAT DUE TO THE EDCO ENGINEBEING A DUAL EXHAUST PORT, THE STOCK EXHAUST PIPE IS NON-FUNCTIONAL. THE HIGHLY MODIFIED CAR WAS NEVER INTENDED TO RACE WITH THE HOOD ON THE CAR. THANKS.

On May-08-13 at 08:41:46 PDT, seller added the following information:

IT SHOULD ALSO BE NOTED THAT THE SUPERCHARGERS HAVE BEEN BENCH TESTED TO 30,000+ RPM'S


Bb Korn Indianapolis Real Gas Powered Engine & Supercharger:
$2,825

Buy Now



Roy Cox Thimble Drome Special picture
Roy Cox Thimble Drome Special


Cox Thimble Drome Dan Gurney Eagle Indy 500 Racer Tether Chrome Oil Filler Caps picture
Cox Thimble Drome Dan Gurney Eagle Indy 500 Racer Tether Chrome Oil Filler Caps


Cox Thimble Drome Dan Gurney Eagle Indy 500 Racer Tether Chrome Fuel Filler Caps picture
Cox Thimble Drome Dan Gurney Eagle Indy 500 Racer Tether Chrome Fuel Filler Caps


Noch H0 14239 Avalanche Engineering Structures Laser-cut Minis Kit Nip picture
Noch H0 14239 Avalanche Engineering Structures Laser-cut Minis Kit Nip


Blade Inductrix Quadcopter Bnf Blh8780 picture
Blade Inductrix Quadcopter Bnf Blh8780


Airbus A321 Airduesseldorf - Air Berlin (reg.d-abc0) picture
Airbus A321 Airduesseldorf - Air Berlin (reg.d-abc0)