Bypass Bmw E46e38e39e38z3m3 Passenger Seat Occupancy Mat Emulator Airbag Sensor
This item has been shown 12508 times.
Bypass Bmw E46e38e39e38z3m3 Passenger Seat Occupancy Mat Emulator Airbag Sensor:
- About Us
- Contact Us
- For BMW
- For Mini Cooper
What is it For?
Seat Emulatoris created to bypass faulty seat occupancy mat/pad sensor and completely simulate passenger in the seat. It disables the airbag light(after the error reset in some cases)and completely reactivates the airbag system.
Very Important Note:Fitting this device to vehicles (such as E63, E65, X3, Z4) which has passenger seat belt warning (when passenger's seat belt is not fastened) will cause seat belt light/alarm to come on constantly, even if no one is sitting in the seat. In this case fitting also an extra belt simulator isnecessarywhich is available for purchase separately orin one package. Click on links:
Seat belt Simulator on its own
Seat Mat Emulator + Belt Simulator (package)
E36, E46 -Fits all variants.
E38- Fits all variants.
X5: E53 EU-Fits all variants.
X5: E53 USA-Fits variants mfg up to about 2005,on &after 2005 check compatibility.
X3: E83EU- Fits variants mfg up to about 2005,on &after 2005 check Seat Belt Warning Light/Alarm Simulator may benecessary.SEE BELOW !
Z3: E36- Fits all variants.
Z4: E85EU- Fits variants mfg up to about 2006,on &after 2006 check compatibility.
Z4 - E85USAFits variants mfg up to about 2003,on &after 2003 check Seat Belt Warning Light/Alarm Simulator may benecessary.SEE BELOW !
Belt Simulatoris designed only for vehicles with installed safety belt light/alarm warning,which occurs after fitting Seat Mat Emulator, as the seat becomes always occupied. Such device disables non fastened seat belt warning. Can be purchasedseparatelyor both devices as one package, see below:
Seat belt warningLight/Alarm Simulator, click the link:
Non fastenedSeat belt Warning Light & Sound Simulator/ Canceler
Seat Mat Emulator + Seat belt warningLight/Alarm Simulator, click the link:
2 wireSeat Occupancy Mat Emulator (Bypass) + Seatbelt Warning Simulator
1 x Seat Occupancy Mat Sensor Emulator (Bypass)
Check CompatibilityBefore Purchaseas per Compatibility Table
Please check compatibility forVariants manufactured on and after the certain years, as specified in compatibility table above.
Slide your seat forward and left it up, check from the rear under the passenger seat (also driver seat for 7 series) for this small black box, occupancy sensor, as in picture, with 2 blue and white wires. Black box is located right underneath the seat in the joint between the vertical and horizontal cushions. If you're not able to find this box, then probably your car comes with newer 3 wires seat occupancy mat sensor system, for which the right emulator can be found down below inrelated products section or in our shop.Further more contact us by message and specify the Last 7 Digits of the Chassis, VIN (Vehicle Identification Number) and we will check the compatibility for you.(Seat Occupancy Mat Sensor Black Box with Original Plug)IMPORTANT !-SALE AGREEMENT
NOTE: By clicking buy it now or offering on the item, the buyer automatically agree with our Sale Agreement rules, specified below.
Check compatibility forVariants manufactured on and after the certain years, as specified in compatibility table above.
Your car has to be Diagnosed did thePassenger Seat Occupancy Mat is faulty,as this bypass will not clear any other faults. It can be checked by proper diagnostics tool.Please follow the fitting instructions provided or seek a qualified electrician if you have any doubt when installing this product.
This is not a reset tool, this is created to bypass seat sensor mat so after installation, you might still need to reset the airbag light - clear errors, as not every variant auto reset.We recommend seeking help in your local nearest garage, to reset with proper equipment, so be aware of the extra cost. Reset with software like INPA is also possible.
After installing this bypass module, the seatbelt warning light and sound will constantly be ON, but only for cars with originally installed seatbelt warnings, as this emulator bypasses seat mat sensor and simulates the passenger in the seat.Do not get confused, bypass module is working fine and the whole airbag system is back to working condition.Extra seat belt warning simulator sold separetelly or together as below is recommended, as the most convenient option to avoid seat belt warnings.
Specified delivery times are only approximate and delivery could take slightly longer or arrive even faster.Related Products/visit ourfor more
Non fastenedSeat belt warninglight and (or) sound simulator, click the link:
Non fastenedSeat belt Warning Light & Sound Simulator/ Canceler
Older type,2 wireplugEmulator withSeat belt warning light and (or) sound simulator, click the link:
2 wireSeat Occupancy Mat Emulator (Bypass) + Seatbelt Warning SimulatorNewer type,3 wireplug Emulatorwith extraSeat belt warning light and (or) sound simulator, click the link:
3 wire Seat Occupancy Mat Emulator (Bypass) + Seatbelt Warning Simulator
Safety Note:Do Not Risk Yours and Others Safety !
Bewareof temporary sellers offering cheaper, low quality or Chinese emulators
Be aware of other temporary, inexperienced in electronics field sellers, offering temporary emulators made in their garage by low quality cheap parts and components or imported from China. These type of emulators disable the airbag light, but does not occupy, neither simulate passenger in the seat, so in case of an accident your car airbags will never deploy! Do not risk! Quality emulators designed by professional Electronics Engineers and made in EU are available only with srsDrive.
The airbag system that we offer is the only cost-effective solution that eliminates the problem of a faulty seat occupancy sensor mat, quickly and reliably. The Passenger Occupancy Sensor Mat bypass is created to detect the passenger in the seat and switch on the airbag. When it fails, then the airbag warning light comes on a dash, and due to its location it is very expensive for most of us to replace it, price ranges from £300 to £700, $800 to $1500. This module will bypass the faulty passenger occupancy mat sensor and completely simulate a passenger in the seat and after the error reset, reactivates the airbag system.This module will not only remove the airbag light (like some other copying sellers on ) but will also ensure that the on-board computer recognizes that a passenger is present in the passenger seat and seat is OCCUPIED, as in picture above. With our module installed, ALL AIRBAGS WILL WORK PROPERLY AND DEPLOY IN THE EVENT OF AN ACCIDENT.
It′s our aim to give you a 5 Star service and 5 Star quality bypass module. After the fitting and clearing airbag light, if all is well, we encourage that you leave Detailed Seller Ratings with your response to reflect this, only then we′ll be able to continue to provide the best possible service and prices to you, our customers.Would be highly appreciated if you Rate us on the time it took to mail the item, not the time it took you to receive it.
- About Us
- Contact Us
We accept only Paypal, as it's safest way to pay and get paid.
Terms and Conditions
Once a offer has been placed, it is a legally binding contract of purchase.
Payment must be received within 7 days of purchase, however if this is not possible, please let us know to discuss solutions.
If payment is not received within 8 days of purchase then a Non Paying Buyer Dispute will be filed, and 10 days later a final fee credit lodged
It is the customers responsibility to ensure that payment is received in the due time as listed above.
- Once you receive your goods, please inspect them for any damage during transit, and report the said damage within 24hrs via message form.
We are not affiliated in any way with BMW. This is not a product of BMW, it is a product that fits BMW. As this is just a fix to the airbag light, we cannot take any responsibility for any damages to your car or responsibility of any legal issues that may arise from installing this. Any problems that arise from installing this unit is the responsibility of the installer, this will not harm your car if installed correctly. This may not be a legal fix for you car in certain countries. For replacement of airbag sensor mat, see your closest BMW for a quote.
Our products may last for the life of your vehicle, but you should be aware that this should not be used as a permanent solution. Therefore DO NOT USE this module with a child seat in the front seat.
We use Irish Priority Mail services for dispatching all items, but then the destination country post office couriers will take a charge to deliver item to your door. All our items are safely packaged with high quality bubble envelopes for maximum safety and security. Irish Standard Priority Mail delivery is available Worldwide.
Standard & Registered Priority Mail approximate delivery times:
Ireland - 1 day, can take up to 2 business days.
North Ireland - from 1 to 5 business days.
UK - from 2 to 4 business days.
European Union - from 3 to 9 business days.
Other EU Destinations - from 5 to 12 business days.
USA, Canada - from 5 to 15 business days.
Rest of World - from 7 to 20 business days.
Express Mail approximate delivery times:
North Ireland - from 1 to 3 business days.
UK - from 1 to 3 business days.
USA, Canada - from 3 to 6 business days.
For you to receive your order quickly, it was processed and shipped mostly within 1 business day after payment. Unfortunately, in some cases there are some delivery delays that are out of our control (Bank) holidays, weekends, long cross-county trips, slow moving Parcel Post, surface route delays, bad weather, Customs inspections, etc.
NOTE: We cannot accept any responsibility for delayed goods due to the services of Irish or destination countries Postal services, as any responsibility for import tax and duty fees.
Before you return any of our items, please contact us via message form.
Why the airbag light is still ON after connecting Bypass (Emulator)?
You need to reset (clear errors) the airbag light, as not every model auto reset, recommended in garage, for BMW cars - with BMW diagnostic-reset equipment, for other - with proper diagnostic-reset equipment.
Why the airbag light is still ON after the reset?
1) Your car has to be diagnosed that the Seat Mat Sensor is faulty, as this bypass module won′t clear other errors.
2) Seat belt pre-tensioner plug, belt force limiter is common fault, usually can be fixed by cleaning wiring harness. Disconnect yellow main seat plug and all other plugs attached to it, clean it from dust and rust or spay some contact cleaner, reconnect everything back and reset again, airbag light now should go OFF for good. If not, pre-tensioner plug could be faulty. Recommended to bring your car for diagnostics to find out the exact fault (error code) and mechanic should advice you further, probably new pre-tensioner (plug) will be required.
Why the seat belt warnings now are active after the reset?
Bypass module will only disable airbag light, so if your car has originally installed seat belt warnings, make sure to connect this extra simulator, included with your purchase order (for appropriate listings) or purchased separately.
Why the seat belt warnings are still active with simulator connected?
Make sure the original seat belt wires connected to seat belt buckle fastener are cut OFF completely and simulator is left connected facing to the big, yellow/black main seat plug.
Is there a problem with your order?
If for any reason you feel that you cannot leave us a Positive Good Comment response with 5 Stars Detailed Seller Rating, if there is any problem with your order, before opening case (dispute) or leaving bad response, please just contact us via Ask a Question form or by phone 00353 89 469 2395 and I will address any concerns that you may have. Don′t just leave us negative-neutral response or low stars in Detailed Seller Rating without contacting, give us a chance to resolve it.Related Product