Cavallo Sport Horse Boot For Barefoot Hoof Use For Sale

---

• Simple front fastening with industrial grade Velcro® closures
• Simple to put on and remove; stays securely on hoof
• Shaped for the natural hoof (needs no inserts or shims)
• Moulded-in back flap for bulb protection and abrasion resistance
• Softee leather foam-filled collar
• Durable construction: Waterproof thread, rustproof metal, and high performance TPU outsole
• Built-in drainage
• Lightweight
• Absorbs shock - so your horse’s legs don’t need to!
• Promotes healthy hooves: allows expansion and contraction, and increased blood circulation
• Built-in break over
• Surefooted low-profile sole
• Unique tread pattern supports frog
• Innovative sole design provides natural heel (skid) brake
• Integrated high density inner rim supports load bearing hoof wall
• 1000 Denier nylon upper is tough and durable
• Reflective for Safer Riding
• Narrower - 1/4” (5mm)

Measure the weight-bearing hoof surface carefully after a fresh trim.
(Do not include heel bulbs.)
Stay within the size ranges indicated in the picture.
We have allowed for growth between regular trims.

Please note that Simple and Sport use the same measuring chart. If your horse has an equal width and length, Simple may be more suitable for your horse. Sport may provide a better fit for a narrower hoof. Simple boots are made width and length equal while Sport is made 1/4" narrower than Simple.

If your horse’s hoof width is greater than the length from buttress to toe, then theCavallo Boot may not be suitable for your horse.

BEFORE YOUR FIRST RIDE:

Only UNUSED boots can be exchanged. To keep the boot clean, we suggest covering the hoof with thin plastic and checking fit on a clean dry surface
.
Like your own riding boots, it is recommended that time is taken to gradually break in your SIMPLE Boots. If your horse has sensitive skin, or if you are going on a long ride and are concerned about potential rubbing, Cavallo Pastern Wraps are available. If your horse is fine boned and there is excess space between the pastern and the boot collar, wraps can also prevent major debris from entering the boot.

SIMPLE FITTING TIPS:

• SOLE: The sole of the hoof should fit securely inside the boot sole. Ensure that the entire weight-bearing wall from front of toe to heel buttress sits within the Simple Boot outsole. It may be helpful to compare the outside raised tread area at the bottom of the boot to the weight-bearing length of the hoof sole (toe to buttress as per diagram above).
• OUTER COVER: Ensure that the boot tongue is pushed firmly against the hoof. Draw the outer flaps firmly around the hoof, pressing the Velcro on the flaps against the Velcro on the tongue; keep taut and level.
• TWISTING: If the boot twists or moves excessively, it may be too big or the outer cover may be loosely fastened.
• TOO SMALL: If you have difficulty putting the boot on, it may be too small. Ideally the boot "snaps" nicely onto the hoof for a good fit. Please check your measurements against the chart above.
• PASTERN WRAPS may be used to assist in the breaking-in process to prevent chafing.

ONCE THE BOOT IS FITTED, if the strap extends beyond the nylon keeper, then you can cut the strap to the preferred length, leaving a line of stitching to prevent unraveling.

PLEASE NOTE: Boots cannot be exchanged if straps have been cut. Be sure boots are correct size BEFORE cutting.

• Outside tread pattern supports the hoof wall
• All-terrain tread minimizes build-up of mud, sand and debris
• Excellent traction while still allowing natural movement
• Center of outsole is recessed to minimize pressure
• High performance specially-formulated thermo plastic urethane (TPU) compound provides maximum protection, tensile strength, durability, and abrasion resistance

Too often over the past years, we have had reports of people returning to metal shoes because their horses would remain sore while barefoot. We made massive attempts to educate and inform trimmers, horse owners and farriers how to manage and trim the feet. The most common problem was when a horse without hoof function and concavity was trimmed in the conventional way and simply left without shoes, putting the hoof on sensitive sole tissue. Our Simple horse boot addresses this potential problem by providing a slightly raised rim around the inside of the sole. It is not even 1 mm high and does not interfere with the counter force of a flat surface for expansion, but it is enough to provide extra sole relief for this common problem. It can also allow further comfort between trimmings.

This item has been shown 4816 times. Cavallo Sport Horse Boot For Barefoot Hoof Use: $125