Cyclone Separator For Dust Collector With Left Hand Inlet


Cyclone Separator For Dust Collector With Left Hand Inlet

This item has been shown 25458 times.

Buy Now

Cyclone Separator For Dust Collector With Left Hand Inlet:
$149


This is my newly designed cyclone separator specifically designed for small dust collectors in the 500 to 900 cfm range. It will, however, work fine with larger dust collectors by just using one of the two 4 inch inlets on those units. The top discharge is 4 inches and not crimped like my other cyclones. This allows some smaller fan motors to slip directly into the top pipe for an immediate tower system. If you want to run a hose to the top discharge on this cyclone for use with a dust collector fan motor not located on top, but just as a dust collector, I also include an adapter to connect your flexible hose from the cyclone to the dust collector. In my first photo I show the cyclone being used with a very small Harbor Freight fan motor. As you can see by the photo I do not even have a filter mounted on the fan motor yet and when planing boards there is no visible discharge coming out at all. You will also notice that the inlet on this unit is on the left so it matches the rotation of the fan motor. This is necessary when building a cyclone tower where the fan assembly is so close to the cyclone. In the photos I show different fan motors with different rotations and the appropriate cyclone to be used with each.

Note: When ordering from this listing your cyclone will come with the inlet on the LEFT HAND SIDE.If you would like the inlet on the right hand side please go to my other products and I have a listing there for the right hand inlet cyclone.

The dimensions on this cyclone are: overall height 32", overall diameter 12", 3 3/4 " outlet on bottom, flange is 6" with five 1/4" holes in flange, Inlet on side and discharge on top are both 4 inches.

This unit is made from 24ga, G90 galvanized and seams are soldered.

On Youtube search the channel " eastcaroga " and a video of this cyclone in operation will come up. It is impressive.


Important Note: I also offer larger sizes that are not listed on . Please send me any questions about larger sizes and I'll be happy to get back to you.


Cyclone Separator For Dust Collector With Left Hand Inlet:
$149

Buy Now



New Dewalt Dce350m2 Dieless Cable Crimping Tool Kit picture
New Dewalt Dce350m2 Dieless Cable Crimping Tool Kit


Hitachi-g12se2 4-1/2 In. Disc Grinder 9.5 Amp picture
Hitachi-g12se2 4-1/2 In. Disc Grinder 9.5 Amp


Dremel-ez412sa 5-pc. 1-1/4 In. 120 Grit Ez Lock™ Sanding Discs picture
Dremel-ez412sa 5-pc. 1-1/4 In. 120 Grit Ez Lock™ Sanding Discs


Porter Cable-7345 5 In. Variable-speed Random Orbit Sander picture
Porter Cable-7345 5 In. Variable-speed Random Orbit Sander


Lenox-1972930 12 In. X 1 In. Metalmax Diamond Cutoff Wheel Gs picture
Lenox-1972930 12 In. X 1 In. Metalmax Diamond Cutoff Wheel Gs


Bosch-gop40-30c Starlockplus® Oscillating Multi-tool Kit picture
Bosch-gop40-30c Starlockplus® Oscillating Multi-tool Kit