Ensign Ful-vue Ii A La Mode Model In Rare Coronation Special Blue Finish 1953
This item has been shown 0 times.
Ensign Ful-vue Ii A La Mode Model In Rare Coronation Special Blue Finish 1953:
Ensign Ful-Vue II a la mode Model in rare Coronation Special Blue Crackle Finish 1953 in Canvas Case, 620 roll film.
Metal bodied with black bakelite/plastic lens housing. 'Coronation Special' blue crackle finish to metal body (in 1953 Ensign introduced coloured versions of the camera to mark the coronation celebrations, one camera dealer remembers dressing his shop window with coloured Ful-Vue's and the union Flag for the celebrations. Called Ful-Vue "a la mode" they came in red, white and blue, very patriotic, and were advertised as fashion accessories)
Hard plastic strap to camera
Brown canvas case with leather strap
Very good condition and fully working - dust inside viewfinder lens. Still with undeveloped film in. Brown canvas case - leather strap snapped on one side
The Ensign Ful Vue
Early in 1939, Ensign Ltd. introduced what was to become one of Britain's most popular cameras. Fondly remembered by many photographers as their first camera, often bought for them by their parents while they were still children. The Ensign Ful-Vue was a design which immediately captured the publics interest, an interest that has lasted even until today as this is still camera that is widely collected, regarded by many as a design classic.
Originally designed in the Bauhaus tradition of 'form follows function' the first Ful-Vue was a simple pressed steel box camera with a crystalline enamel finish. Its large reflex view finder gave, according to Ensign, "... a better idea than ever before of what the finished result is likely to be,.." It was equipped with the patent Ensign 'all distance lens' which enabled close-up photography down to a distance of 3 feet by means of a pull out lens mount and had a simple I.T shutter. The camera was designed to give one picture size of 6 x 6cm allowing for 12 pictures on a 120 roll film, because of this only one viewfinder was necessary and the small picture size gave more room at the top of the camera body, enabling a larger view finder to be built with a lens of almost an inch in diameter. This gave the camera one of the brightest view finders of the time, better even than some of the more expensive reflex cameras available. Interestingly the mirror for the view finder was not made of mirrored glass but a polished metal plate secured by two screws on either side. If you consider the price of mirroring glass compared to chroming a sheet of metal then cutting it up, this was probably a more economical method of producing a mirror. In addition a metal plate does not crack when dropped, adding greatly to the ruggedness of its design.
The end of the war in Europe and later the Far East prompted a backlash against the austerity of war time Britain and a wish by the general public to move forward into a prosperous and brighter future. In an attempt to show the public the way "from war to peace" Sir Stafford Cripps, president of the Board of Trade, proposed that an exhibition of British products should be arranged to show the public what manufacturers could achieve in post war Britain. Cripps instructed the Council of Industrial Design to organise the exhibition and they in turn approached manufacturers requesting them to exhibit designs for new and futuristic products. The exhibition was called 'Britain can make it' and was held at the Victoria and Albert Museum, which at that time was empty. Barnet Ensign Ltd. responded by exhibiting two new cameras the Ensign Commando and a completely redesigned Ful-Vue.
The design of the new 1946 Ful-Vue is worth special comment; not only did Ensign abandon the conventional box shape for this camera but they utilised many of the new fashions in design to produce a very modern looking product. This was a camera specifically designed for aesthetic appeal fully embracing the principals of streamlining as suggested by the American designer Harold van Doren in his book 'Streamlining in Industrial design' of 1940. To gauge the success of their new product Ensign offered pre production models of the Ful-Vue to its staff at half price. Reactions varied to the new introduction, "some felt the camera to be revolutionary others that it was so completely different that it wouldn't sell". however all agreed that "it was a comfortable camera to handle because of the big view finder". The publics endorsement was enthusiastic and the camera sold in thousands.
An improved model was introduced in 1950, dubbed the Ful-Vue II. It had an all plastic front panel housing a new shutter assembly which for the first time provided the camera with a flash synch terminal. Initially it was fitted with Ensigns own bayonet synch plug later being replaced by the compur co-axial type. The lens was also improved, the 'all distance' lens that had been with the camera from the beginning, was now replaced by a three point focusing lens. Unfortunately the accuracy of the distance markings left much to be desired making focusing a rather hit and miss affair.
In 1953 Ensign introduced coloured versions of the camera to mark the coronation celebrations, one camera dealer remembers dressing his shop window with coloured Ful-Vue's and the union Flag for the celebrations. Called Ful-Vue "a la mode" they came in red, white and blue, very patriotic, and were advertised as fashion accessories. A clear plastic case came with the camera presumably to allow others to admire your matching handbag and camera.
In the B.J.A. of 1954 Ross Ensign, as the company was now called, announced a new introduction for that year, the Ful-Vue Super. Replacing the Ful-Vue II, which they claim had sold over a million units. The super was similar in appearance to the earlier model but with slightly more angular lines and a hood for the view finder made out of steel onto which was emblazoned the Ross Ensign trade mark. The camera back was also of pressed steel and could be completely removed for film loading. A swing out cradle was also incorporated into the camera greatly improving the ease of loading and eliminating one of the major criticisms with previous cameras. The camera body was no longer made of pressed steel but cast alloy. The main body and view finder housing now being two castings joined in the middle and held together by tie bars screwed at either end. The shutter was integral to the body and the flash synch terminals were now threaded pins used to mount the flash unit onto the camera, similar in design to the flash holder made for Brownie flash cameras by Kodak. Within the year a flash holder was released to accompany the camera. The most significant change was however the switch to 620 roll film. This seems to have been Ross Ensign policy on their cheaper cameras both the Snapper and the Clubman, contemporaries of the Ful-Vue Super, used 620 roll film. Design was once again used as a selling point with this camera. Advertised in the Ross Ensign catalogue of June 1954 as being developed from; " Improvements suggested by the manufacture of over a million earlier Ful-Vue cameras....."
The final chapter in the Ful-Vue story came with the Fulvueflex Synchroflash. Although it carried the Ross Ensign badge it was a cheap plastic camera and a total departure from the sturdy tradition of Ensign cameras to date. Their is little known about this camera and no adverts are to be found, it is assumed that this model was introduced towards the end of Ross Ensigns trading around 1957. This camera was larger than the Ful-Vue Super and used 120 roll film rather than 620. With no new quality products the company went out of business a couple of years later bringing the Ful-Vue's 20 year run to an end.