Ethernet Relay Controller Module - Web Server Ip


Ethernet Relay Controller Module - Web Server Ip

This item has been shown 0 times.

Buy Now

Ethernet Relay Controller Module - Web Server Ip:
$90


Ethernet controller module Ethernet Relay controller module - WEB server IP

Hello ers, my name is George Jordanov and I want to share with you what I made so far with this Ethernet controller

Demo page is now available for online view:

username : demo

password : demo

Things that you will need for make it work:

1. You will need power adapter with output voltage 12V DC like this one:

When you chose adapter please check that the inner pin is the positive one ( + ) and the outer is negative ( - )

2. UTP Cable for connecting to your Computer(Laptop) to this board

3. Its time to configure your network to match the network of the controller:

Remove your Internet Cable and plug in this one from the board.

For Win7:

Go to Control Panel -> Network and Sharing Center -> Local Area Connection -> Properties -> Internet Protocol version 4 (TCP/IPv4) and set manually:

Note: If your IP is set already please write it down somewhere because you will need it later to turn your Internet again.

IP to : 172.16.100.1

Subnet Mask: 255.255.0.0

For WinXP:

Go to Control Panel -> Network Connection - > Local Area Network - > Properties - > Internet Protocol (TCP/IP) and set manually:

IP to : 172.16.100.1

Subnet Mask: 255.255.0.0

Leave all other settings empty and click OK

In my computer I used for internet External LAN Card and used On Board LAN for controller.

4. Now you have to be able to open the WEB Server at this address http://172.16.100.2/

You should be asked for username and password, use admin/admin

5. From this point you can control Outputs states or read the inputs.

Also I connect a 8 Relay Board to the controller and now I'm able to switch an 220V appliance

Relays parameters are :

  • 12VDC / 15A
  • 24VDC / 15A
  • 125VAC / 15A
  • 250VAC / 10A
And a Simple Excel spreadsheet is available for download to control the Output.

You can use as well this program for configuration the module and control the outputs:

Datasheet:

All necessary things for this project can be brought from me just contact me for more details.

If you have Router I can make the default IP to be for etc 192.168.1.100 or anything you want to match the router network.

That's it for Now :)

If you have any question or suggestions for this project I'm glad to hear it :)

Note : This Ethernet module doesn't work withZyXEL GS-108S 8-Port Desktop Gigabit Ethernet Media Switch



.

Ethernet Relay Controller Module - Web Server Ip:
$90

Buy Now



Transition Networks Cpsmc1900 19 Slot Point System Chassis W/19 Cfetf1013-105 picture
Transition Networks Cpsmc1900 19 Slot Point System Chassis W/19 Cfetf1013-105


Transition Networks Cpsmc1900 19 Slot Point System Chassis W/19 Cfetf1018-105 picture
Transition Networks Cpsmc1900 19 Slot Point System Chassis W/19 Cfetf1018-105


Emulex Oneconnect Oce14102-um-e 10 Gb Ethernet Network Adapter - Pci Express picture
Emulex Oneconnect Oce14102-um-e 10 Gb Ethernet Network Adapter - Pci Express


Inter-tel 550.2001 Isdn St Basic Rate Nt1 3-port picture
Inter-tel 550.2001 Isdn St Basic Rate Nt1 3-port


Transition Networks Cpsmc1900 19slot Point System Chassis W/19 Cfetf1013-105 &ps picture
Transition Networks Cpsmc1900 19slot Point System Chassis W/19 Cfetf1013-105 &ps


Ingm-pv7410-blc Vc Flex-10/10d Module Opt picture
Ingm-pv7410-blc Vc Flex-10/10d Module Opt