Htp Argon Co2 Mig Tig Flow Meter Regulator Welding Weld Flowmeter


Htp Argon Co2 Mig Tig Flow Meter Regulator Welding Weld Flowmeter

This item has been shown 116812 times.

Buy Now

Htp Argon Co2 Mig Tig Flow Meter Regulator Welding Weld Flowmeter:
$27


Thisbrand new HTP Flowmeter which is perfect for Migand Tig Welding. Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. This flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators. You can see from the diagram, we do stock replacement parts for this flowmeter. Remember, not all flowmeters are created equal- they may look the same on the outside, but the others do not have HTP Quality on the inside.

The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated bya ball which moves up and down in the flow tube, so this flowmeter will handle MIG and TIG welding both steel and aluminum. The fitting is a CGA-580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gastanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our listing for those.

A very nice thing about this Flowmeter is the outletwill fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting.If you have a Miller,Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut.

Watch out for knock-off flowmeters that do not use the standard N-24 nut and NP-72 outlet nipples. These flowmeters use nylon washers to seal, where our fittings seal on the fitting and do not require any nylon washers!

If you need a gas hose to go with this flowmeter they are available for $15.95 in our store. The hose is item number 140781122107.The gas hose will ship for no additional shipping charge, please request an invoice if the shipping is not correct.

***Save on shipping by combining purchases of select MIG, TIG, or Plasmaparts. However,you must pay for all items with one combined payment for this shipping discount.Separate payments for each item are not eligible for a shipping discount.

Go to our store and see all the items we have for sale: class="MsoNormal" style="line-height: normal; background: white;">If you need any other hard to find welder parts that are not listed, send us an e-mail with a digital photo- we might have just what you need.

Buy in confidence from HTP America, Inc., your total welding specialist since 1981, where for over35 years all we have sold are quality welding supplies at affordable prices.Please send us a message if you have any questions on our items.

12020-30



Htp Argon Co2 Mig Tig Flow Meter Regulator Welding Weld Flowmeter:
$27

Buy Now



Concoa Controls Corporation Of America Gas Regulator Model/inlet 3127331-01-580 picture
Concoa Controls Corporation Of America Gas Regulator Model/inlet 3127331-01-580


Uniweld Argon Gas Regulator Cga 580 - Used picture
Uniweld Argon Gas Regulator Cga 580 - Used


Union Carbide Welding 2 1/2
Union Carbide Welding 2 1/2" Gauge 0 - 100 Lb Per Sq In. 1/8" Npt Connection


Oxweld 2 1/2
Oxweld 2 1/2" Gauge 0 - 180 Lb Per Sq In - 1/4" Npt Rear Connection


New Superior Products
New Superior Products "y" Connector W/ Shut-off Valve Yv-420, Argon Co2 Etc


Turbo Torch Us Gauge Bu-2581-am Pressure Gauge Connector For Oxygen System  picture
Turbo Torch Us Gauge Bu-2581-am Pressure Gauge Connector For Oxygen System