Kingston RAM KVR1333D3D4R9S/4G 4GB DDR3-1333 (lot of 2)


Kingston RAM KVR1333D3D4R9S/4G 4GB DDR3-1333 (lot of 2)

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Kingston RAM KVR1333D3D4R9S/4G 4GB DDR3-1333 (lot of 2):
$99.99


Lot of 2
DESCRIPTIONThis document describes ValueRAM’s 512M x 72-bit 4GB(4096MB) DDR3-1333 CL9 SDRAM (Synchronous DRAM)registered w/parity, dual-rank memory module, based onthirty-six 256M x 4-bit DDR3-1333 FBGA components. TheSPD is programmed to JEDEC standard latency 1333Mhztiming of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contactfingers and requires +1.5V. The electrical and mechanicalspecifications are as follows:FEATURES• JEDEC standard 1.5V ± 0.075V Power Supply• VDDQ = 1.5V ± 0.075V• 667MHz fCK for 1333Mb/sec/pin• 8 independent internal bank• Programmable CAS Latency: 6,7,8,9,10• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock• Programmable CAS Write Latency(CWL) = 7(DDR3-1333)• 8-bit pre-fetch• Burst Length: 8 (Interleave without any limit, sequential withstarting address “000” only), 4 with tCCD = 4 which doesnot allow seamless read or write [either on the fly using A12or MRS]• Bi-directional Differential Data Strobe• Internal(self) calibration : Internal self calibration through ZQpin (RZQ : 240 ohm ± 1%)• On Die Termination using ODT pin• On-DIMM thermal sensor (Grade B)• Average Refresh Period 7.8us at lower than TCASE 85°C,3.9us at 85°C < TCASE ≤ 95°C• Asynchronous Reset• PCB : Height 18.75mm, double sided componentSPECIFICATIONSCL(IDD) 9 cyclesRow Cycle Time (tRCmin) 49.5ns (min.)Refresh to Active/Refresh 110ns (min.)Command Time (tRFCmin)Row Active Time (tRASmin) 36ns (min.)Power 3.960 W (operating)UL Rating 94 V - 0Operating Temperature 0° C to 85° CStorage Temperature -55° C to +100° C

Kingston RAM KVR1333D3D4R9S/4G 4GB DDR3-1333 (lot of 2):
$99.99

Buy Now