Mosin Nagant Trigger Spring Kit - Shorter Lighter Trigger Pull
This item has been shown 65910 times.
Mosin Nagant Trigger Spring Kit - Shorter Lighter Trigger Pull:
The original Mosin Nagant shorter lighter trigger pull kit over 5000 sold
This kit is for Mosin Nagant rifles it is used to modify the trigger so that the trigger pull is lighter and the trigger travel is shorter. A shorter and lighter trigger pull results in better accuracy. This kit is superior to all others offered for the Mosin Nagant rifles because the spring in this kit is a brand new design that shortens the trigger instead of turning it into a longer heavier two stage style trigger like all other trigger return springs offered for the Mosin Nagant rifles. This kit requires no permanent modification to the weapon and can be removed as easily as it is installed.
1) Remove receiver from stock
2) Remove sear spring retaining screw
3) Insert sear spring shim
4) Insert sear spring retaining screw and tighten
5) Push trigger retaining pin out untilflush with inside of trigger
6) Insert trigger return spring inside of trigger cavity
7) Push trigger retaining pin back in through the center of trigger return spring
This Kit Will Fit:
Mosin Nagant M91/30
Mosin Nagant M38
Mosin Nagant M44
Chinese type 53
Most othervariantswith the standard trigger assembly
May not function or mayrequire extra fitting with the Pro Mag Archangel AA9130after market stock
Use these helpfulinstallation Check:
is intended as a do-it-yourself project and detailed instruction will be included. However if you are not confident in yourabilityto preform this task safely and without altering the weapon to such a state that it would be unsafe to use it isrecommendedyou seek the assistanceof a qualified gunsmith.
No International Shipping U.S. Sales Only