Q11a Paragon Kiln/ Gold Refining./gold Scrap/ Pottery/

Q11a Paragon Kiln/ Gold Refining./gold Scrap/ Pottery/

This item has been shown 0 times.

Buy Now

Q11a Paragon Kiln/ Gold Refining./gold Scrap/ Pottery/ :

These kilns are made especially for us, so it may take up to a month for shipping, depending on how backlogged the factory is, but it is well worth the wait!AP6.0 Q11A

China Painting Decals Dolls Enameling Glass Fusing Porcelain and Stoneware Fast Firings Low-Fire Ceramics Silver Clay


Paragon Q-11-A

The Q-11A was out of production, but I asked Paragon to build them for us, as they are exactly what we need as small refiners. I have had and used mine since 1985 with no problems yet! They seem to last forever, and if something goes wrong, replacement parts are readily available for them. I have sold hundreds of these on and have had no problems yet! You can easilly put four (4) 15 gram grucibles in at a time, and you can easily put in six (6) 1.5" cupels, or two 3" melting dishes... This is a must have for any serious small refiner (I own three now), and is the best priced small kiln for what it does on the market. The Q11A is very well built, and will last a lifetime if cared for.

These kilns are built to order, and can take from 1-3 weeks before Paragon ships, depending on how busy they are.

The Q-11A fires rapidly to 2350F on a common 120 volt household outlet. It is light-weight, portable, and powerful. Create breathtaking jewelry or small keepsakes using almost any medium you can imagine: enameling, silver clay, china painting, glass, lost wax casting, and ceramics.

The Q-11A comes with an infinite control switch, safety pilot light, and pyrometer (temperature sensor). The kiln includes a vent hole with cover in the door.

The switch, pilot light, and pyrometer are mounted in the kiln base to save table space. The front control panel is tilted for easy operation.

Adjust the firing speed with the infinite control switch. It cycles on and off through a bi-metallic timer. The higher the switch setting, the longer the heating elements stay on during each cycle. When the switch is turned to High, the elements stay on continuously. (Note: The switch does not automatically hold a temperature. It requires small adjustments to maintain a temperature hold.)

The Q-11A heating elements, exposed in dropped, recessed insulating firebrick grooves, are easy to replace. Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.

The Q-11A ships by UPS within the U.S. to give you lower shipping cost and faster service. Specially designed cartons and foam padding assure that the kiln will arrive safely.

Paragon kilns are built to be dependable. They are loaded with attention to details, such as the costly nickel-plated copper wire with high temperature glass-braided insulation. Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns.

If you are having difficulty choosing a large kiln, experiment with a variety of techniques in a small E-series kiln. Then choose a larger kiln later when you have a better idea of the projects you are interested in. After you buy a larger kiln, you can still use your E-series indefinitely for small projects and for testing.

“Paragon kilns just go on working forever,” said Jeff Zamek, author of “What Every Potter Should Know.” He added, “Paragon kilns have one of the lowest incidences of repair of any kiln manufactured in the U.S.”

“I am 70 years old. I have quite a few china painter friends and have been teaching a long time. Every single one of my students and friends has a Paragon Q-11A. I always let my gals see how wonderful that kiln is. You can plug it in anywhere and fire it quickly.” Dorothy Trent in Chandler, Arizona

The Furniture Kit

The furniture kit consists of carefully selected fireclay shelves and posts for this particular model. When estimating the price of the kiln, include the cost of furniture. The furniture allows you to stack multiple layers of ware. Without it, you could fire only the ware that would fit on the kiln bottom.

Q-11A, Xpress-Q-11-A & TnF-Q-11 Furniture Kit

1 C-2 Shelf

4 - 2” long 1" wide Square Posts

1 lb. Bag Kiln Wash Shipping Weight: 2 lbs.


Max. Temperature










Breaker Size


Circuit Wire Size

14 gauge





Control Type

Infinite Control Switch







Chamber Volume

0.14 CU.FT.
3.96 litres

Chamber Width

147 mm

Chamber Depth

153 mm

Chamber Height

159 mm

Outer Size

11.00W x 15.00D x 18.00H Inches
280W x 381D x 458H mm

Ship Size

21.50W x 19.00D x 16.50H Inches
547W x 483D x 420H mm

Ship Weight

37.00 Lbs.
16.78 Kg.

Ship Method

This Kiln Ships Via Truck

Part Number

Q11A* Base Model

We now have a brick and mortar store.16135 S. Golden RoadGolden, Co. 80401



Q11a Paragon Kiln/ Gold Refining./gold Scrap/ Pottery/ :

Buy Now

Vintage Brass Guy Dropper  Miner's Lamp Light Lantern picture
Vintage Brass Guy Dropper Miner's Lamp Light Lantern

Hydrofuge Gold Concentrator (dual) picture
Hydrofuge Gold Concentrator (dual)

Vintage , Miners Carbide, Lantern, Abandoned Mine Find.  picture
Vintage , Miners Carbide, Lantern, Abandoned Mine Find.

Mini Gold Dredge 1
Mini Gold Dredge 1" Goldsnare Sgs-1 Electric 12v

Vintage Aircool Grip Carbide Lantern With Cap picture
Vintage Aircool Grip Carbide Lantern With Cap

Vintage Union Carbide Miners Lamp Calcium Carbide 2 Lb. Tin Can - Usa-empty picture
Vintage Union Carbide Miners Lamp Calcium Carbide 2 Lb. Tin Can - Usa-empty