Ranco Etc-111000 120 - 240v Digital Cold Temperature Control


Ranco Etc-111000 120 - 240v Digital Cold Temperature Control

This item has been shown 0 times.

Buy Now

Ranco Etc-111000 120 - 240v Digital Cold Temperature Control :
$45


Prewired Plug Not Included

Ranco ETC-111000 Spec Sheet

Digital Display

  • Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
    When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing
  • The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-In Safety
  • Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
    The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad
    • Temperature Setpoint Range: -30° to 220°F
    • Differential Range: 1 to 30 Degrees F
    • Input Power Requirements: 120/208/240 VAC
    • Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable
    • Control Ambient Temperatures: Operating (20-140), Storage (40-176)
    • Ambient Humidity: 0 to 95% RH, non-condensing
    • Enclosure: NEMA 1
    • Dimensions: 6.52" high x 2.7" wide x 2.48" deep
    • Agency Approvals: UL Listed, CSA Certified
    • Switch Action: SPDT

    Specs
    Application: Remote Bulb Temperature
    Temperature Range: -30° to 220°F
    Differential: 1° to 30°F
    Voltage: 120v

    240v

    208v
    Sensor: Thermistor
    Bulb Size: 2" x 1/4"
    Capillary Length: 8 ft.
    Operating Temp Range: -20° to 140°F
    Enclosure Type: NEMA 1 Enclosure
    Height: 6.52"
    Width: 2.7"
    Depth: 2.48"
    Switch Action: SPDT
    Humidity Range: 0 to 95% RH (Non Condensing)
    Contact Ratings 120v: 16.0 AFL

    96.0 ALR
    Contact Ratings 240v: 8.0 AFL

    48.0 ALR
    Resistive: 15 A

    8 A
    Pilot Duty Rating: 125 VA
    Stages:
    Stagesclose

    Stages describes the number of heat or cool sources that you need to control with a single thermostat.

    One

    Posted with Mobile


    Ranco Etc-111000 120 - 240v Digital Cold Temperature Control :
    $45

    Buy Now



    Brand New Topog-e 66d Steam Boiler Handhole Plate 2-1/2
    Brand New Topog-e 66d Steam Boiler Handhole Plate 2-1/2" X 3-3/4" Ob Gaskets


    Electronic Vacuum Gauge picture
    Electronic Vacuum Gauge


    6 Pack Of 1/4
    6 Pack Of 1/4" Od Brass Gas Pilot Tube Compression Fittings


    Packard C230c 30 Amp 208/240 Vac 2-pole Definite Purpose Contactor Hvac picture
    Packard C230c 30 Amp 208/240 Vac 2-pole Definite Purpose Contactor Hvac


    Tekmar 420 Boiler Reset Module One Tn4, Boiler, Dhw  picture
    Tekmar 420 Boiler Reset Module One Tn4, Boiler, Dhw


    Lp Conversion 396021 And 4.1 Orfice Honeywell Reznor 200 picture
    Lp Conversion 396021 And 4.1 Orfice Honeywell Reznor 200