Rp100 12v Dc With 0v Out Dry Contact Wireless Remote Control On Off Relay Switch
This item has been shown times.
Rp100 12v Dc With 0v Out Dry Contact Wireless Remote Control On Off Relay Switch:
0v output dry contact switch - On/Off Remote Control key fob
Need an output switch that can be controlled remotely? Here is the gadget just made for that purpose, use this kit as a simple switch to make contact open or close remotely. Prefect for any fun or serious projects. home, automobile and boat projects. RP100 can be mounted into anything that you want it to be able to OPEN and CLOSE, ON or OFF with a click of the remote control. Compact size with mounting holes make it easier for installation. Come with 2 remote key fob and 1 relay switch receiver.
RP100 is setup with an unique code so there will be no interference when 2 or more RP100 are operate side by side. Specs:
Required power source: 12Vdc
Operating Bandwidth: 315MHZ
Remote key fob mode: Latching, on/off, 2 buttons
Relay rated: 12~30VDC@10Amp, 110~250VAC@10Amp, not for use with heavy duty motor or high power lighting application.
Receiver Box Dimension: 1 7/8" x 1 7/8" x 1" (4.7cm x 4.7cm x 2.5cm)
red (connect to power source 12V+)
black (connect to power source ground)
blue (antenna, n/c, mount to where best range can be obtain)
whites (switching contact connectors)
RP100 is a 0
volt output dry contact switch.
RP100 does not provide any voltage at the output relay switch wires; DO NOT confuse this RP100 with our RM100 switch