Rebult Adler 467 Specifically Set Up For Sewing Leather 1/2" Thick-207 Thread For Sale
Rebuilt Adler 467-LTHR
Specifically Set Up For Leather
For Sale we have a rebuilt Adler (Durkopp Adler) Made in Germany 467 Single Needle Walking Foot with Large Top Load Bobbin and Reverse. Comes Complete with NEW USA Made Solid Plywood 20" X 48" Table Top with White Formica Top, NEW NKS-I-Legs with Dual Locking 3" Casters and Stand is also adjustable up and down, NEW 110V Nick-O Sew 3/4 HP Servo Speed Control Motor along with NKS-SR-2 Dual Speed Reducer so the Operator has Complete Control of the Sewing Machine at all times. Below is a couple of the features this machine has and how we set it up. Thanks for looking and please contact us with any questions.
Single needle walking foot that is specifically set up to sew leather. We put a special small smooth feed dog in the machine so you can turn tight corners and also the smoothness so it will not scar the leather along with the narrow dual toe foot so you can sew real close to edges.
This machine has a presser foot lift of 1/2" and will sew pretty much that thickness or just a hair less. The maximum thread size is a T207 on the needle and a T138 on the bobbin. We always recommend using a size smaller on the bobbin than the needle because it always pulls up a better stitch.
Machine will come with 10 extra needles, flip up roller edge guide, 6 additional bobbins and we will email you the service manual, parts, engineers and instruction manual as we have it in PDF format.
Our 5 mechanics are here to help you with any questions you may have with the machines 5 days a week. They are very knowledgeable and can help in any situation and are just a phone call away.
Speed reducer with servo motor allows the operator to slow at the slowest speeds but still keep the torque to penetrate the thickest leather.
Machine is set up withleather needle in the 190R needle system so you can get the maximum needle bar clearance.
You are more than welcome to pick up the sewing machine at our office at anytime and if you need a late night pick up or weekend pick up we can work with you to accommodate that.
We will professional package your machine and ship it by freight or LTL for $175 to any commercial address or local terminal pick up in the lower 48 states. The machine will come completely assembled but the sewing head will be in a prefoamed box for shipment purposes. It is easy to install back into the setup but we do this to ensure the machine makes it safely in one piece. Also easier for carrying into buildings and into homes. If you want the machine delivered to a residential address we must have your phone number and will be an additional $80.
Thank you and please contact us with any questions at 1-800-526-4256.
NICK-O SEWING MACHINE CO.
7745 Hwy 76 Stanton, TN 38069
This item has been shown 6147 times.
Rebult Adler 467 Specifically Set Up For Sewing Leather 1/2" Thick-207 Thread: $1,195