Samsung Clp-315 Clp310 Clp310n Clp315w Toner Drum Refill Cartridge Reset Chip


Samsung Clp-315 Clp310  Clp310n Clp315w Toner Drum Refill Cartridge Reset Chip

This item has been shown 0 times.

Buy Now

Samsung Clp-315 Clp310 Clp310n Clp315w Toner Drum Refill Cartridge Reset Chip :
$16


Samsung CLP 310-315- N/W auto resetchip !

ONE CHIP FOR LIMITLESS PRINT, SAME CHIP RESET TONER UNIT/ DRUM UNIT / TRANSFER BELT UNITS ALL!

Do not need to buy new cartridges or cartridge chips, just refill toner to your used cartridges, save huge cost by each refilling

it support all firmware versions

each printer need just 1 piece chip. same chip support all cartridges on printer!

oncesolder to board, use forever. no pagelimit.

original starter cartridges or aftermarket cartridges.. you can use with this chip any ofcartridge typewhich you have on your printer at moment.

our chipshave positive differencefrom others.. such as

- the wirelessable with our chip - reset TONER-DRUM-TRANSFER BELT units counters
-supports languages depend onregions. (english, spanish, portuquese, italian, deutsche, french....) so customer use the printerin their language. (printer menu language does not change..) - doesnot need to remove original chips from mother board. - free technical support

same module suitable for 310 -315 - 310N - 315W board versions. new or old..

no any disable on functions of printer. just command counter .

Reset chip will start printer at 0 pages and 100% toner in most cases. It will count down normally till you turn off printer, after turn printer on it will reset again as duty cycle

no cost when refill toner.no need to use toner chips after solder it.

a detailed clear instructions will be send with the chip in packed.

same shipping charge for multi pieces ordering!


Samsung Clp-315 Clp310 Clp310n Clp315w Toner Drum Refill Cartridge Reset Chip :
$16

Buy Now



Mini Pcb Mk2b Heat Bed Hot Plate 12v 24v Heatbed For 3d Printer Prusa Mendel picture
Mini Pcb Mk2b Heat Bed Hot Plate 12v 24v Heatbed For 3d Printer Prusa Mendel


20pcs New Origin Limit Switch Touch Switches Right Bending 3d Printer 1a/125v Ac picture
20pcs New Origin Limit Switch Touch Switches Right Bending 3d Printer 1a/125v Ac


5pcs V6 Hotend Nozzles J-head Brass Nozzle /printhead 0.3/0.4/0.5,1.75/3.0mm, V6 picture
5pcs V6 Hotend Nozzles J-head Brass Nozzle /printhead 0.3/0.4/0.5,1.75/3.0mm, V6


5pcs Left Bend Pins Origin Limit Switch Touch Right Bending Mouse Button For 3d  picture
5pcs Left Bend Pins Origin Limit Switch Touch Right Bending Mouse Button For 3d


20pcs X New Left Bend Pins Origin Limit Switch Touch Right Bending Mouse Button  picture
20pcs X New Left Bend Pins Origin Limit Switch Touch Right Bending Mouse Button


10pcs X Left Bend Pins Origin Limit Switch Touch Right Bending Mouse  3d Button  picture
10pcs X Left Bend Pins Origin Limit Switch Touch Right Bending Mouse 3d Button