Holidays.net Online Store

Holdays.net Home


November 25th, 2014
World Day to Eliminate Violence on Women

November 27th, 2014
Thanksgiving Day

November 28th, 2014
Lincoln's Birthday

November 28th, 2014
Black Friday

November 28th, 2014
American Indian Heritage Day

November 29th, 2014
World Solidarity Day with Palestinian People

November 30th, 2014
First Sunday Advent

December 1st, 2014
World AIDS Day

December 2nd, 2014
World Day for Slavery Abolition

December 3rd, 2014
World Day for Persons with Disabilities

December 5th, 2014
International Volunteer Day

December 7th, 2014
International Civil Aviation Day

December 7th, 2014
Pearl Harbor Remembrance Day

December 8th, 2014
Feast of the Immaculate Conception

December 9th, 2014
International Anti-Corruption Day

December 10th, 2014
Human Rights Day

December 11th, 2014
International Mountain Day

December 17th, 2014
Wright Brothers Day

December 17th, 2014
First Day of Chanukah

December 17th, 2014
Pan American Aviation Day

December 18th, 2014
International Migrants Day

December 19th, 2014
International South-South Cooperation Day

December 20th, 2014
International Human Solidarity Day

December 21st, 2014
December Solstice

December 24th, 2014
Christmas Eve

December 24th, 2014
Last day of Chanukah

December 25th, 2014
Christmas Day

December 26th, 2014
Kwanzaa

 



Search:

Single Punch Manual Tablets Press Machine, Pills Press Machine , Model Cn-0 For Sale

Single Punch Manual Tablets Press Machine, Pills Press Machine , Model Cn-0

detail
  • POLICY
  • FAQ
  • CONTACT
Search Categories

General Description
This machine is a manual type single punch tablet press with the capacity to produce round tablets of less than 12mm in diameter and is applicable to pharmacies, the chemical industry, the food service industry and medical establishments amongst others.

Specifications
The main technical parameters and production capabilities are as follows:

Max. Pressure

1.5Kn

Max. Dia of Tablet

12mm

Max. of Tablet

6mm

Max. Depth of Filling of Tablet

16mm

Production Capacity

20-40pcs/min

Machine Weight

24KG

Overall Machine Dimensions

300mm*190mm*480mm

Structure
The main body of this machine is a gantry-type cast in carbon steel. The main spindle junction connects with thepartial core gear and the cam. The rocker arm and the hand shank are found to the right of the spindle. When turning the main spindle manually, it causes the partial core gear, cam, lifting lever feeder to turn also but with a different lifting movement.
Procedure
1. feeds in materials
2. punches tablets;
3. ejects tablets.
These three procedures work continuously and each program can be adjusted to form tablets to different specifications.

Physical Features

  • small in size
  • light weight
  • pleasing overall design
  • compact structure
  • operator friendly
  • versatile – comes with different die
  • portable

Operation, Adjustment and Guidelines

SETTING UP THE DIE MOLDS (2)
STEP 1

  • Dismantle the hopper by unscrewing the large spring loaded nut under the mold platen.
  • Loosen the small nut (2) on the plunger under nut (1).

NOTE
When inserting the lower punch the triangle should face towards you. During insertion swing the handle gently backwards and forwards to facilitate positioning of the lower punch.
STEP 2

  • Loosen the small nut (1) on the face of the mold platen
  • Insert the middle mold into the hole in the mold platen.

STEP 3

  • Loosen the large nut over the middle mold.
  • Insert the upper punch.
  • After inserting the upper punch use the handle to carefully lower the large nut onto the upper punch. It will stop by itself. Using two fingers push the upper punch upwards until it will not go any further.
  • You will now need one spanners and a pair of pliers.
  • Tighten the large nut but it must not reach the nut above it. Use one spanner to hold the upper nut in place and the pliers to tighten the lower nut.

STEP 4

  • Turn the machine round. To refit the hopper, refit the spring loaded nut under the platen using two hands to make sure the shaft goes into the hole in the moving plate above the platen.

The die mold is now set.
NOTE
Before using the machine turn the handle a few times to make sure the moving parts run smoothly.

DISMANTLING THE MOLD DIES (2)
STEP 1

  • Dismantle the hopper as before by unscrewing the large spring loaded nut under the mold platen.
  • Loosen the large nut over the middle die mold.
  • Turn the handle anti clockwise until it reaches its highest position to raise the upper punch to its highest position.
  • Using a pair of pliers, grip and remove the upper punch with a downward movement. If it is tight, tap your pliers with another tool.
  • Loosen the screw (1) on the face of the mold platen.
  • Insert a long handled Allen key into the space under the die mold and push the die out.
  • Loosen screw (2) under screw 1.
  • Remove the lower punch by gripping it with a pair of pliers and raising it by turning the handle.

The mold die is now dismantled.
SETTING UP THE DIE MOLDS (1)
STEP 1

  • Dismantle the hopper by unscrewing the large spring loaded nut under the mold platen.
  • Loosen the nut under and on the left of the platen.
  • Grip the mold platen at the rear and lift it out.
  • Loosen screw (2).
  • Insert the lower punch into the hole in the die mold making sure the triangle on the lower is facing forward.
  • Tighten screw (2).
  • Loosen screw (1) on the dismantled mold platen
  • Insert the middle die mold into the cavity on the dismantled mod platen.
  • Tighten screw (1).
  • Reinstall the mold platen
  • The lower punch should be aligned with the hole in the die mold.
  • Loosen the large nut over the die mold.
  • Use the handle to raise the large nut and insert the upper punch into the hole in the nut.
  • Tighten the large nut but it must not reach the nut above it. Use one spanner to hold the upper nut in place and the pliers to tighten the lower nut.
  • With great care fix the mold platen into position so that the upper punch is aligned perfectly with the hole in the die mold.
  • Lower the upper punch into the hole in the die mold.
  • Replace the nut under the mold platen and tighten with a spanner.
  • Replace and tighten the nut at the other side.
  • Swing the hopper back into position and align the screw holes.
  • Turn the machine round. To refit the hopper, refit the spring loaded nut under the platen using two hands to make sure the shaft goes into the hole in the moving plate above the platen.

Setting the die molds is now complete.
NOTE
Before using the machine turn the handle several times to check all the moving parts run smoothly.

DISMANTLING THE DIE MOLDS (1)

  • Dismantle the hopper by unscrewing the large spring loaded nut under the mold platen.
  • Loosen the large nut over the middle die mold.
  • Turn the handle anti clockwise until it reaches its highest position to raise the upper punch to its highest position.
  • Using a pair of pliers, grip and remove the upper punch with a downward movement. If it is tight, tap your pliers with another tool.
  • Loosen the nut under and on the left of the mold platen.
  • Turn the machine round and loosen the nut on the other side.
  • Grip the mold platen at the rear and lift it out.
  • Loosen screw (1) on the facve of the mold platen.
  • Push out the die mold from underneath.
  • Loosen screw (2) under screw (1).
  • Lift out the lower punch.

Dismantling the die molds is now complete.




CapsuLCN International Co.,Ltd

TEL: 0086-577-65155517
Fax: 0086-577-65155517
Cell phone: 0086-15967727000
( China time 8:00-23:00)
  • PAYMENT
  • SHIPMENT
  • RETURN
  • NOTICE

  1. 1. We accept Paypal payment only. (Other methods of payment, please contact me)

    2.Payment must be made within 14days after you offer it. Non-payment may result in a UPI(Unpaid Item) on your account .As have charged me for the final fee if you didn’t pay.

    3.Items unpaid after 14days will be subject to an unpaid item dispute. If there is a problem with your payment, please contact us firstly. Once your payment has been received, we will automatically close the dispute. offerding on an item is a contractual agreement between the buyer the seller.


  2. 1. All our packages are sent by DHL, EMS or ePacket with 1-2 business days for handling time,after receiving the payment except customs item.

    2. Shipment time:
    DHL: 3-4 days
    EMS:7-10 days
    ePacket: 7-15 days
    Please note: An exact delivery day varies by different countries.Sometimes take a little longer, due to local dispatch or other reasons. It might goes more than 10days, if you cannot get within 20 days since we ship out, please email me.

    3. We only ship to address. Please make sure your address in is matched with your shipping address before you pay.

    4. We do not bear any customs duty or tax. All the items will be declaired as a low price to make you be easy to get through from the customs check.

    5. If you have any other questions, please email us at any time. Please include the Item number with your email.


  3. We accept returns by permission only - returning goods without consultation does not guarantee acceptance of the goods or a refund. To arrange return of goods, please email us or call us on 0086-577-65155515.


  4. Please check the package if there is any damage or shortage before you sign your name on the airway bill. Or you can take a photo as witness with the courier. Otherwise we will not refund you after the item is signed-for. Thank you so much for your understanding & support, we appreciate it very much. For any further information, please do not hesitate to contact us!


Single Punch Manual Tablets Press Machine, Pills Press Machine , Model Cn-0

This item has been shown 19280 times.

Buy Now

Single Punch Manual Tablets Press Machine, Pills Press Machine , Model Cn-0:
$1,420




【big-sales 】 5-1 Dermabrasion Peel Ultrasonic Bio Photon Scrub Microdermabrasion picture
【big-sales 】 5-1 Dermabrasion Peel Ultrasonic Bio Photon Scrub Microdermabrasion


Gynecare Md0100 Motor Drive Unit @ picture
Gynecare Md0100 Motor Drive Unit @


40k Ultrasonic Cavitation Bipolar Tripolar Rf Lipo Laser Vacuum Weight Loss A27 picture
40k Ultrasonic Cavitation Bipolar Tripolar Rf Lipo Laser Vacuum Weight Loss A27


Pro Cryo Cold Body Slimming Beauty Cellulite Removal Vacuum Fat Dissolve Slimmer picture
Pro Cryo Cold Body Slimming Beauty Cellulite Removal Vacuum Fat Dissolve Slimmer


Oxyhealth Vitaeris Inflatable Hyperbaric Oxygen Chamber picture
Oxyhealth Vitaeris Inflatable Hyperbaric Oxygen Chamber


Lot Of 10 Edwards Lifesciences Truwave Reusable Cable Model Px1800  picture
Lot Of 10 Edwards Lifesciences Truwave Reusable Cable Model Px1800


Ultrasonic Cavitation Vishape Body Slim Liposuction Fat Loss Vacuum Rf Photon  picture
Ultrasonic Cavitation Vishape Body Slim Liposuction Fat Loss Vacuum Rf Photon


Two Cavitation Ultrasound Photontherapy Liposuction Rf Slimming Machine 300w Pro picture
Two Cavitation Ultrasound Photontherapy Liposuction Rf Slimming Machine 300w Pro


 Carestream Dryview 5850 Laser Imager + Kodak Directview Classic Cr System picture
Carestream Dryview 5850 Laser Imager + Kodak Directview Classic Cr System


Cold Frozen Lipolysis Laser Cryotherapy Fat Reduction Celluite System Body Slim picture
Cold Frozen Lipolysis Laser Cryotherapy Fat Reduction Celluite System Body Slim