Threaded Steel Guitar Neck Inserts For Tele Strat Best Price On Ebay Luthier Kit For Sale
LOWEST PRICED KIT ON – STAINLESS STEEL 16PCS
SALE - FOR A LIMITED TIME
FREE SECOND SET INCLUDED WITH PURCHASE - 8 INSERTS / 8 MACHINE SCREWS
If you have a Tele, Strat, P or J Bass – or any other bolt neck guitar, we’ve put together this kit that will allow you to remove and replace your neck repeatedly, without the risk of stripping the neck screws.
They’re especially useful on guitars with truss rod adjustment at the heel or if you have stripped out your neck screws.
If you look closely you’ll see some differences between these inserts and others.
These threaded steel inserts are made in Germany, they are extremely precision made with an 8/32 machine thread inside and a deep flute outside thread designed specifically for wood.
Being hard steel and socket drive they are simple to install without the threat of stripping inherent with inserts made of softer materials like Brass and Zinc.
They are designed for use on wood and therefore have no machine threads / Loctite on the outside.
These inserts are longer (approx. 1.5 times longer for more thread purchase) and importantly, slightly narrower (so you have slightly more wood left between the insert and the edge of the neck), than others available.
They install with an Allen key (which you supply) - they have a 5/32 inch (or 4mm – you can use either) hex socket at one end and they are completely different from the type designed to be installed with a slot screwdriver.
Also included are oval head machine screws - American made stainless steel 8/32 x 1_3/4 inch – Phillips drive.
These stainless machine screws have a much higher tensile strength than the #8 wood screws that come from the factory and will allow you to bolt your neck down that much tighter.
Importantly, they match a Fender screw head exactly (size and shape) and will sit perfectly in your existing neck plate – once installed they look exactly like the original wood screws and there’s no way to tell the neck is bolted using inserts.
Complete installation instructions are included.
Quick shipping, we have 100's of sets in stock and prepackaged.
**You supply your own 17/64 inch drill bit*
Shipping Flat Rate to anywhere in the USA is $6.99 USDShipping Flat Rate to anywhere in the Canada is $8.99 USD - (you can thank Canada post for that, it costs more for me to send to Montreal than to Switzerland)
Shipping to the UK and Europe is $9.99 USD – contact me for all other destinations before offerding if you need a shipping quote.
Shipping price includes insurance against loss only, by Canada Post
WARRANTY: Items are guaranteed as described. However,
we will not accept returns and issue a refund, unless we have misrepresented an item.
Pictures constitute a major part of the item
description and supersede the written description.
If you are unhappy with the item because it was grossly misrepresented in the description, we must be contacted within three (3) days of receipt of the package. Items may be returned only upon our approval. We will not entertain any request for a refund, from anyone who cites anything covered in the item description as their reason for return – so please read carefully.
THIS IS NOT A FENDER MADE ITEM
Note: We are in no way affiliated with FMIC / Fender® and NO Fender® warranty applies.®,Stratocaster® and Strat®, are registered trademarks of Fender Musical Instruments Corp
This item has been shown 0 times.