Vintage Monark Dual Springer Bicycle Bike Suspension Fork Built In Usa
This item has been shown 32960 times.
Vintage Monark Dual Springer Bicycle Bike Suspension Fork Built In Usa:
MONARK TYPE I
DUAL SPRINGER BIKE FORK
A third generation, improved version of the very popular Monark Fork!
Considered by many to be:
"THE MOST BEAUTIFUL SPRINGER EVER PRODUCED"
After offering the reproduced Monark Springer Fork for over five years now, we listened to our customers, implemented the changes they wanted, and are now offering this much improved versionof the original.
Reinforced Welding: Both Type I and Type II springers share the same MIG welded re-inforcements. Structual contact points are now "beefed up" to make this fork "bullet proof
Larger, triple chrome plated springs, which provide much smoother action. Springs on our previous version were smaller and only zinc plated. These new springs add to the beauty and function of the fork. Springs are made by O'hare Spring Co. and are plated by Angelus Plating.
For use on all 1 inch threaded bicycle frames that will allow for a 7 inches or shorter steering tube length. The steering tube is threaded 2 inches and can be cut to size for a custom fit.
Adapters are available to use on newer 1 1/8 threadless frames.
All forks come with a black finish.
Complete Bearing race now included.
We offer a full money back warranty if not satisfied.Monark Fork Tech Specs: Headset: 1 x 32.5 x 26.4 Adapter: Available for 1 1/8 threadless headset Fork Tube Length: 7.5 “long, threaded 2” from the top Wheel Size: For use with wheels up to 26” Tire Size: Will accept up to 26 x 2.35 Fork Leg Length: 15” long from the bottom bearing race to the drop outs where the front wheel axle is.
Call anytime M-F 9-5 PST for more info or questions: 310-396-1453.