Huge Werewolf Mount Halloween Prop Haunted House Horror Wolfman Taxidermy Wolf
This item has been shown times.
Huge Werewolf Mount Halloween Prop Haunted House Horror Wolfman Taxidermy Wolf:
Half-lifesize (front half) werewolf mount measures about 36" from the tips of the claws to where it would sit against a wall. This werewolf prop is crafted entirely out of man-made materials and can be disassembled for easy shipping. The eyes and teeth are UV reactive, and the teeth also glow in the darkness after being exposed to bright light or UV light. The eyes also have light reflecting pupils so they have eerily realistic "eyeshine". This can be accentuated by a spot light source like a halogen spotlight. set at an angle that's close to (in front of or behind) the viewer's eye level. This piece does require minor assembly (the arms and head are keyed so that they will fit precisely onto the body) and some type of non-water-based glue will be necessary to permanently secure the parts. I'd recommend either bondo or a hot glue gun to permanently bond the parts together. I will supply full and detailed instruction for assembly. There is a hanger on the back of the torso so that you can display this mount on a wall, or you can bolt, screw or attach it to pretty much anything - a post or pole behind a bush or inside of a window, for instance. There is a piece of 3/4" plywood set into the back to accept screws and hardware. That said, I would caution against outdoor use for this piece unless it is in a covered area protected from rain and water. Please note - due to postal regulations of some countries, this item may have to ship in two packages. One country with tight package size restrictions is Australia - this would have to go in two packages in order to ship via postal service. If you are unsure about shipping costs, please ask for a quote.