Universal 12v Dc On - Off Remote Control Wireless 12v Output Relay Switch Rm100
This item has been shown times.
Universal 12v Dc On - Off Remote Control Wireless 12v Output Relay Switch Rm100:
12V Universal compact Remote Control Switcher
On-Sale-Best gadget ever!
-Remotely turnOn and Offfor any 12 Volt DC devices such as computer lighting & accessories, auto lighting kits, landscaping lighting, boat lighting or other electronic applications.
-Compact size and mounting holes make it easier for installation.
-Kit includes one receiver box and 2 remote controls.
-Each remote comes with its own code so there is no interference with other similar remote control.
Specs:Input/output voltage: DC 12V
Remote steady range ~50ft
Range can be extending further depend in area, device setup and remote control battery strength…
Operating Bandwidth: 315MHZ
Remote Battery: 27amp, 12V
Receiver standby Current: 4.5mA
Relay contact operating load up to 8 amp max.
Operating voltage: 12Vdc, output voltage is adequate to input voltage
Dimension: 1.75" x 1.75" x 1"
Red wire: 12vdc positive power input
Black wire x2: for ground or negative connection for both input power and output device
Green wire: Antenna, no connection required
White wire: 12Vdc positive power output when box is turn on
-Do not connect directly to any 120/240VAC power without using a 12V AC/DC converter or adapter.
-An inline fuse from your power supply is recommended to prevent any surge or short to this kit or your connected device.
Connect power source 12vdc (+) to Red wire
Connect power source Ground (-) to Black wire (there are 2 black wires, both are the same)
Connect White wire to output device 12Vdc (+)
Connect Black wire to output device Ground (-)
Mount Blue wire (Antenna) to where you can get a best reception from remote control, make sure tip of antenna wire does not touch any live voltage.