0.96\"/1.3\'\' SPI Serial /128X64 OLED LCD Display Screen Module For Arduino UNO R3
![0.96\](img-large/g/5ZcAAOSwe09Z-ZbM/s-l1600/0-96-1-3-SPI-Serial-128X64-OLED-LCD-Display-Screen.jpg "0.96\")
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
0.96\"/1.3\'\' SPI Serial /128X64 OLED LCD Display Screen Module For Arduino UNO R3:
$4.89
Product Details
What is OLED?
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
The use of OLED technology offers the following advantages for flat-panel displays?
1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below)
2. Self-emitting light, in contrast to the required backlight for TFT-LCD
3. High luminosity
4. Lightweight and thin (less than 2 mm)
5. Capable of wide viewing angles?~180??
6. Low operating voltage and power consumption
7. Quick response (~ ? second level)
8. Wide range of operating temperatures (-40c to 85c)
A Comparison of OLED and TFT-LCD Display Technologies
How Does OLED Emit Light?
OLED\"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
Note: If you decide to buy OLED display, you must confirm that you can make it work by yourself, we\'ll haven\'t any technology support except all the datasheet. Thanks for your understanding and support.
0.96\" SPI 128X64 OLED LCD LED Display Module
Needn\'t backlight, the display unit can self-luminous
High resolution: 128 * 64
Viewing angle:> 160 °
Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Voltage: 3V ~ 5V DC
Working Temperature: -30 c ~ 70 c
Module Size: 27.3MM *27.8MM
I2C/IIC Interface, need 2 IO only.
Driver IC: SSD1306
Backlight color:White/Blue
1.3\'\' SPI Serial 128X64 OLED LCD Display Screen Module
1.Neednt backlight the display unit can self-luminous
2.High resolution:128*64
3.Viewing angle:>160
4.OLED screens inside the driver chips : SSH1106
5.Supports many control chip : fully compatible with Arduino 51 series,msp430 series , stm32/2 CSR IC , ETC
6.Ultra-low power consumption:full screen lit 0.08w
7.Voltage 3v-5vdc
8.Work temp : -30c-70c
9.Spi interface
10.The color of word : Blue/White/Whit&Blue
Pin Description
1.GND: Power ground
2.VDD:2.8-5.5V power supply
3.SCK: CLK clock
4.SDA: MOSI data
5.RES: Reset
6.DC: data / command
7.CS: chip-select signal
80mm*80mm*25mm Power Supply LCD
Performance and features:
- LCD screen with white characters and a blue background displays two groups of voltage and current simultaneously.
- Uses a standard DC-Socket (5.5/2.1) input
- Coarse and fine tuning positioner for precise voltage regulation.
- Input voltage 9-24V (max. 30V), reverse polarity protection
- Two groups of current can work simultaneously without conflict.
- Adjustable voltage available on DuPont connectors and terminal blocks which can be tightened with screws.
- Output voltage adjustable from 0.8V to 20V, max. 2A load with short circuit protection.
- Fixed 5V Output available on USB- and DuPont-Connectors. Max. 2A load with short circuit protection.
- Over 90% efficiency rate (related to the input and output voltage, current and dropout)
- Size: 80mm*80mm*25mm.
-Weight: about 85 grams.
Operation: Powers on automatically when power is attached. Use the “Power”-Button to switch off and on again.
Automatic zero-calibration may be less accurate with the age of the product, due to component aging and Environmental temperature changes.
Calibration Mode: Disconnect power and all loads. Press the “Power”-Button and keep it pressed while connecting Power. The automatic zero-calibration will be performed. On success, the LCD will display 0.
Package included:
1PC
- Payment Method
- Shipping Policy
- Returns & Refund Method
- Managed Payment. But we only Accept your Address, please Make sure it\'s 100% right.
- Payment must be received in 5 business days of sale closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
1. We only ship to the confirmed address provided by . please make sure your address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
Returns & Refund Policy
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can\'t take a refund.- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
We maintain high standards of excellenceand strive for 100% customer satisfaction!response is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutralor negativeresponse, so that we can satisfactorily address your concerns.
0.96\"/1.3\'\' SPI Serial /128X64 OLED LCD Display Screen Module For Arduino UNO R3:
$4.89