1980\'s New Old Stock Solid Brass Vintage Bridge Base Plate
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1980\'s New Old Stock Solid Brass Vintage Bridge Base Plate :
$50.00
You are offerding on a genuine 1980\'s solid brass bridge plate that was manufactured by Kahler (American Precision Metalworks) back in the 1980\'s. These plates were made in various formatsfor companies such as Charvel, Fender, DiMarzio, andother guitar part dealers in that era. This brass base plate is NOS (New Old Stock), and has never been used or installed on a guitar. Key specifications are listed below, and include an E to E string spacing of 2.02\".The base plate is equipped to accept a saddle width of 0.390\". The threetrem block mounting holes are spaced at 0.883\", or the total mounting hole spacing distance is 1.766\". The hole spacing for the six bridge mounting holes is 0.440\", or 2.20\" from the center of the two outside bridge mounting holes.To help facilitate easy reference, this information is summarized below, and in the two photos listed above. Please contact me if you have any questions, or you require additional information. Note: Buyers must have a minimum positive response rating of 10 unless you contact me first before offerding. Otherwise, your offer will be canceled. E to E String Spacing = 2.02\"Saddle Width = 0.390\"Trem Block Mounting Hole Spacing = 0.883\" Total Trem BlockHole Spacing for Outside Mounting Holes= 1.766\"Bridge MountingHole Spacing Between Each Hole = 0.440\"Hole Spacing Between Outside Bridge Mounting Holes = 2.20\"
1980\'s New Old Stock Solid Brass Vintage Bridge Base Plate :
$50.00