4 ADAPTER BACK MOUNTING PLATES FOR CRAGAR SS WHEELS & REGULAR STUD SPINNERS 2.62

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

4 ADAPTER BACK MOUNTING PLATES FOR CRAGAR SS WHEELS & REGULAR STUD SPINNERS 2.62:
$19.36

This listing is for 4 spinner back plates.

These back plates were made for 14\" and 15\" Cragar SS wheels so a REGULAR STUD MOUNT SPINNER could be installed on a Cragar SS wheel. These plates will not fit on a Cragar Original Center Cap or Cragar Original SS spinners. They were made for Stud mount spinners only.

Look at the picture of the spinner above so you will know what these back plates will fit.

Stud mount spinners have a plain top and are the most common spinners.

These back plates were made so a 5/16 screw could mount through the center hole.

Regular stud spinners require a 5/16 screw.

Cragar SS original spinners or center caps have a smaller screw thread.

These back plates solved the problem of mounting a stud spinner onto a Cragar SS wheel instead of an Original SS spinner.

The back plate goes on the back of the wheel, and attaches with a screw to the cap on the front of the wheel.

Warning: These back plates are the same diameter asCragar SS back plates, However, these will not work on any or the Original CragarBrand SS Center Caps or Original Cragar Brand Spinners. Please refer to the measurements andcomparison Information in the pictures provided.

Outside Diameter:2.62”

Distance to the center of the plate: 1.31”

Center Hole for mounting screw Diameter: 5/16”

Material: Metal

Style: Flat

Thickness: 1/16”

In order to assure proper fitment you must measure andconsider the following:

1)Will a 2.62”outside diameter fit through the back side of my wheel?

2)Are the holes in the correct place to fit my spinner?.

3)What length screws will I need. (screws not included) 5/16 is the size you need. You can get those screws at a hardware store.

The only way to assure these back plates will work on yourwheels is to measure. I put uppictures to help you with the fitment.

Texasresidents willhave to pay sales tax.

We are very particularwith our shipping.We secure each and every package and go out of our wayto protect your item.

Thanks for looking!

International buyers – please note:import duties, taxes, and charges are not included in the item price or shippingcost. These charges are the buyer\'s responsibility.Please check with your country\'s customs office to determine what theseadditional costs will be prior to offerding or buying.