4 pcs Swarovski 2709 Rhombus Crystal Flatback Rhinestones 10mm x 6mm AQUAMARINE

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

4 pcs Swarovski 2709 Rhombus Crystal Flatback Rhinestones 10mm x 6mm AQUAMARINE:
$6.34

Click to EnlargeClick to EnlargeClick to EnlargeClick to Enlarge

Swarovski 2709 Rhombus Flatbacks No-Hotfix

Swarovski Flat Backs No Hotfix are loose crystal elements that are backed with platinum foiling for extra brilliance and protection. These Flat Backs can be easily applied to a variety of carrier materials using standard one- or two-components glues.

Swarovski Article # 2709 - Rhombus Size 10mm x 6mm
Color Aquamarine (202)
Product Type Flatbacks No Hotfix Brand Swarovski (Made in Austria) Quantity4 pcs

INSTRUCTIONS
SHIPPING
PAYMENT & RETURN
About Us

GLUING

Gluing SWAROVSKI ELEMENTS adds a sparkle to a wide range of materials such as metal, wood, plastic, cork, etc. Flat Backs No Hotfix and SWAROVSKI ELEMENTS with a flat back side are especially appropriate for gluing.

Application

1. The surfaces to be glued must be clean, dry and free from oil or grease.
2. Add an appropriate quantity of glue to the two surfaces to be glued and place them together exerting a light pressure.
3. Remove any surplus glue with a dry cloth.
4. Reseal the tube and store in a cool dry place.

Application of Flat Backs No Hotfix You can use flat backs no hotfix crystals for gluing onto gemstones, metal, plastic, wood and many other materials. Always make sure that the surface is clean and that you use the correct amount of glue. Use tweezers or a wax stick for applying the stone to the surface.
Steps:

1. The surface must be cleaned properly before gluing.
2. The glue should be applied with a dispenser.
3. Pick up the stone with the tweezers.
4. Carefully place the stone in the correct position and press it down gently.

Creating motifs with Flatbacks No Hotfix To use Flatbacks No Hotfix in combination with a special foil for motifs to decorate accessories, for example, follow these steps:

1. Peel off the white protective film and position the flat backs with the flat side upwards on the carrier foil for your own motif.
2. Apply the correct amount of glue.
3. Position the motif on the pre-treated and clean surface.
4. To keep the motif even, spread a soft cloth over it and then weigh it down.
5. After the glue has hardened, you can remove the transparent film.

My Chobos
inkfrog terapeak

inkfrog terapeak