ASMODUS SNOW WOLF 200W EXCLUSIVE LIMITED EDITION BOX MOD SUB OHM Pre-Order

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

ASMODUS SNOW WOLF 200W EXCLUSIVE LIMITED EDITION BOX MOD SUB OHM Pre-Order:
$179.99

Click to EnlargeClick to Enlarge

***** PLEASE NOTE THIS IS A PRE-ORDER FOR THE NEXT BATCH (LATE AUGUST OR SEPTEMBER) OF THE LIMITED EDITIONSNOW WOLF*****

Pleasekeep in mind that the release datemay change, and I will keep you updatedas much as possible by posting it at the bottom of this ad. It isguaranteedthat you will get your item but any date originally given maychange. Please do not buy if you cannot wait until you get your item. I am anhonest seller with an excellent track record so buy with confidence that I willdo everything in my power to ensure a pleasant transaction.

UPDATE 31 JULY 2015 - ASMODUS has released the 1st batch, and all have been distributed. If you have not received yours, you were not among the first batch. The message I received below this morning from ASMODUS.

\"Hey Greg,

We are getting the Snow Wolf 200W Limited Edition inbatches.

You will still be getting them.

You will receive those Snow Wolf 200W LE once we reach yourshop we will send you an invoice for them.

-Cynthia\"

PLEASESEE THE RECOMMENDED BATTERY DETAILS FOR THIS ITEM ALSO

Only use Sony VTC Batteries, Efest Purple 18650, Samsung INR18650-25R OR LG HE2 Batteries with your box mod.
Always use the same brand at the same time, do not mix batteries of different brands.
The batteries used in you mod MUST have the same level of charge, be the same brand and should be batteries that were purchased together.
Always use protected batteries from reputable brands.
Please use your own judgment when following these tips.

This is the LIMITED EDITION Snow Wolf 200w. EXCLUSIVE for Asmodus Distribution.
Features a gunmetal finish border and white LED screen.
Laser engraving is metallic gold.The SnowWolf-200W brings the vape world to new heights. Featuring the latesttechnology and intuitive temperature control mechanics, the SnowWolf-200Wachieves a max output of 200 watts for even bigger vapor. TECHNICAL PARAMETERS:
Variable Wattage Range: 5.0W - 200.0W
Output Voltage Range: 0.5V -7.0V
Atomizer Ohm Range: 0.05 ohm - 2.5 ohm (supports both regular kanthal andnickel wires)
Battery Voltage Range: 6.2V - 8.4V
Temperature Adjustment Range: 100-350°C / 212-662°F
Battery: Two (2) 18650 high-drain batteriesMAIN FEATURES:
★ Max Power 200W
★ Temperature ControlAdjustment
★ Low VoltageProtection
★ Low ResistanceProtection
★ Input High VoltageWarning
★ Output Short-CircuitProtection
★ Reverse BatteryProtection
★ OverheatingPreventionINSTALLING THE BATTERIES:
Please install batteries before use. To ensure correct installation, followthese instructions:
Open the battery panel; insert batteries into battery slots with the positiveand negative poles aligned as illustrated; ensure ribbon is wrapped aroundbatteries to remove the batteries easily. To remove the batteries, pull on theloose end of the ribbon to lift batteries out of their slot.TURNING THE DEVICE ON:
Once batteries are installed, the device enters “turn-on mode” with the logodisplayed, and will then enter into “lock mode” shortly after. Press the firebutton 5 times consecutively within 3 seconds to unlock the device. Afterunlocking the device, atomizer resistance, output wattage, output voltage,battery level, and current regulated temperature will be displayed. Without anatomizer installed, the output voltage will read 0.00V and resistance will read0.00Ω. If you attempt to fire without an atomizer installed, “CHECK ATOMIZER”will be displayed.UNLOCKING THE DEVICE:
When the device is locked, pressing any button will show the message “LOCKEDCLICK 5X”. When “LOCKED CLICK 5X” is displayed, press the fire button 5 timesconsecutively within 3 seconds to unlock the device. Your device is now readyto vape.ADJUSTING THE WATTAGE:
If you would like to adjust the wattage, press both the “+” and “-” buttonssimultaneously until the “W” in front of the wattage value is flashing. Now bypressing the “+” or “-” buttons you can increase or decrease the wattagerespectively. The output wattage range is 5.0 to 200.0W. By pressing “+” below50W, watts increase by 0.1 increment; above 50W, watts increase by 0.5increments; above 100W, watts increase by 1 increment. By pressing “-”, below50W, watts decrease by 0.1 increment; above 50W, watts decrease by 0.5increments; above 100W, watts decrease by 1 increment. When wattage is higherthan 150W, the system is pulse output and the upper right corner of the screenwill display a \"P\" symbol.ADJUSTING THE TEMPERATURE:
NOTE: Only when using pure nickel wires in your atomizer build will thetemperature control function work. Ordinary wires can only make use of the wattadjustment function.
If you would like to adjust the temperature, press both the “+” and “-” buttonssimultaneously until the “°C” or “°F” in front of the temperature value isflashing. Now by pressing the “+” or “-” buttons you can increase or decreasethe temperature respectively. The temperature range is 100-350°C / 212-662°F.By pressing the “+” or “-”, temperature will increase or decrease by 1°C / 1°F.The system can switch between °C and °F by scrolling pass the minimum ormaximum temperatures. (i.e. when you click “+” upwards to 662°F and continue tohold the button, it will automatically switch to 350°C; when you click “-“downwards to 212°F and continue to hold the button, it will automaticallyswitch to 100°C, and vice versa.)TURNING THE DEVICE OFF:
When device is not in use, the screen will darken after 20 seconds. After 30seconds the display will turn off and the device will enter standby mode. After30 minutes in standby mode, device will automatically lock. Press the firebutton 5 times in 3 seconds consecutively anytime during standby mode to turnoff the device. “SYSTEM OFF” will then read on the display. Press any button towake up the system.BATTERY INFORMATION:
When battery voltage is lower than 6.2V, device will display “LOW BATTERY”.When battery power is low and does not match the current wattage or temperaturesetting, device will display ”CHECK BATTERY” and stop firing. When batteryvoltage is less than 5.4V, device will not power on; when this display appears,change batteries before use.RESISTANCE RANGE:
This device supports only a resistance range from 0.05Ω - 2.5Ω, otherwise thedevice will not fire. When the resistance is lower than 0.05Ω, “LOW ATOMIZER”will be displayed and will not fire; when the resistance is higher than 2.5Ω,“HIGH ATOMIZER” will be displayed; when there is no atomizer, “CHECK ATOMIZER”will be displayed; when the atomizer shorts, “ATOMIZER SHORT” will bedisplayed.ATOMIZER INSTALLATION AND DISASSEMBLE:
If you remove the atomizer while the device is on and press the power button,“CHECK ATOMIZER” will be displayed. If you remove the atomizer while firing,“ATOMIZER REMOVE” will be displayed. When the device is on and you install anatomizer, “NEW COIL UP SAME DOWN” will be displayed; press the ‘–‘ button if itis the original atomizer, press the ’+’ button if a new atomizer has beeninstalled.
NOTE: Please make sure the new atomizer is cold, otherwise the device willmisread the atomizer resistance.FIRE DURATION:
The firing duration of the device is 20 seconds. If fired for longer than 20seconds, the device will display “WORK OVERTIME” and automatically stop firing.Please read the instruction manual carefully before use.
1. The SnowWolf-200W is not suitable for persons under the age of 18, pregnantor nursing women, persons at risk of heart disease, hypertension and diabetes,or taking medication for depression or asthma.

2. The device mayinclude small parts. Please keep out of reach of children and pets.

3. Do not store theunit in excessively hot or cold Environments.

4. Do not install thebattery backwards—the device will not power on.

5. Do not abuse orleave the device unattended.

6. The device is soldpurely for recreational purposes—it is not a smoking cessation device and hasnot been tested or approved for use as such.

7. Please adjust thewattage to lower than 15W when you are using e-liquid terapeak