Brand New Downstream 02 Oxygen Sensor for 1994-1999 Toyota Celica 2.2L O2 Sensor
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Brand New Downstream 02 Oxygen Sensor for 1994-1999 Toyota Celica 2.2L O2 Sensor:
$16.19
Technical Oxygen Sensor FAQ
Our Oxygen sensor's Advantage
Technical Oxygen Sensor FAQ
The best way to determine the exact locations for your vehicle’s sensors is to consult a maintenance manual such as those put out by Haynes or Chilton. I am getting a CEL/MIL and a …… code. Do I need to replace my oxygen sensors?
Not necessarily. The oxygen sensor simply reports the data that it gathers. For example, if you are getting a lean mixture code, you may have a vacuum leak or a faulty fuel injector. Replacing the oxygen sensor will not fix this problem. You will just get the same code again. You can find more information about diagnostic codes for your oxygen sensors on this page.
How can I test my oxygen sensor?
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
Do I need to replace all of my oxygen sensors at once?
It is best to replace your sensors in pairs. For example, if you replace the downstream left sensor, you should also replace the downstream right. However, on most vehicles produced since 1996, replacing one sensor (especially the front engine monitoring sensor) will cause the ECU to set a code for the other sensors.
This is because the new sensor switching activity is much faster than that of the older aged sensors. It is probable that on most vehicles, the code will be set within 30-60 days AFTER the first sensor replacement.
How do I locate specified sensor locations (B1S1, downstream left, etc.)?
Refer to the diagrams below.
Left and right sensor positions are found in reference to the rear of the engine (the side opposite of the belts).
Upstream (pre-cat) and downstream (post-cat) are found in reference to the catalytic is a California emissions sensor? How do I know if I need one?
A California emissions O2 sensor is meant for vehicles that are designed to meet California emission regulations. Such vehicles should have a sticker under the hood or on the driver’s door jamb that identify them.
PACKAGE INCLUDED:
NEW PREMIUM HIGH PERFORMANCE O2 OXYGEN SENSOR
Brand New Downstream 02 Oxygen Sensor for 1994-1999 Toyota Celica 2.2L O2 SensorOur Oxygen sensor's Advantage
Technical Oxygen Sensor FAQ
The best way to determine the exact locations for your vehicle’s sensors is to consult a maintenance manual such as those put out by Haynes or Chilton. I am getting a CEL/MIL and a …… code. Do I need to replace my oxygen sensors?
Not necessarily. The oxygen sensor simply reports the data that it gathers. For example, if you are getting a lean mixture code, you may have a vacuum leak or a faulty fuel injector. Replacing the oxygen sensor will not fix this problem. You will just get the same code again. You can find more information about diagnostic codes for your oxygen sensors on this page.
How can I test my oxygen sensor?
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
Do I need to replace all of my oxygen sensors at once?
It is best to replace your sensors in pairs. For example, if you replace the downstream left sensor, you should also replace the downstream right. However, on most vehicles produced since 1996, replacing one sensor (especially the front engine monitoring sensor) will cause the ECU to set a code for the other sensors.
This is because the new sensor switching activity is much faster than that of the older aged sensors. It is probable that on most vehicles, the code will be set within 30-60 days AFTER the first sensor replacement.
How do I locate specified sensor locations (B1S1, downstream left, etc.)?
Refer to the diagrams below.
Left and right sensor positions are found in reference to the rear of the engine (the side opposite of the belts).
Upstream (pre-cat) and downstream (post-cat) are found in reference to the catalytic is a California emissions sensor? How do I know if I need one?
A California emissions O2 sensor is meant for vehicles that are designed to meet California emission regulations. Such vehicles should have a sticker under the hood or on the driver’s door jamb that identify them.
PACKAGE INCLUDED:
NEW PREMIUM HIGH PERFORMANCE O2 OXYGEN SENSOR
Item SpecificsManufacturer Part Number :O2 Oxygen Sensor (Not Air Fuel Ratio Sensor)Reference Part Number :234-2010Location :Please Check the Notes of Compatibility tableSurface Finish :Brand NewWarranty :YesBrand :AftermarketLength :20 Inches# of Wires :2UPC :712367165222UPC :712367165222Shipping
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to offerding/buying.]
[We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.]
Returns1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before offerding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. ]
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my "-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]
1. We will leave positive response once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral response. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive response to all our customers.
3. If you are satisfied with the product you received, please leave us positive response and 5 scores DSR.]
PictureQR Code Brand New Downstream 02 Oxygen Sensor for 1994-1999 Toyota Celica 2.2L O2 Sensor
Our Oxygen sensor's Advantage
Technical Oxygen Sensor FAQ
The best way to determine the exact locations for your vehicle’s sensors is to consult a maintenance manual such as those put out by Haynes or Chilton. I am getting a CEL/MIL and a …… code. Do I need to replace my oxygen sensors?
Not necessarily. The oxygen sensor simply reports the data that it gathers. For example, if you are getting a lean mixture code, you may have a vacuum leak or a faulty fuel injector. Replacing the oxygen sensor will not fix this problem. You will just get the same code again. You can find more information about diagnostic codes for your oxygen sensors on this page.
How can I test my oxygen sensor?
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
Do I need to replace all of my oxygen sensors at once?
It is best to replace your sensors in pairs. For example, if you replace the downstream left sensor, you should also replace the downstream right. However, on most vehicles produced since 1996, replacing one sensor (especially the front engine monitoring sensor) will cause the ECU to set a code for the other sensors.
This is because the new sensor switching activity is much faster than that of the older aged sensors. It is probable that on most vehicles, the code will be set within 30-60 days AFTER the first sensor replacement.
How do I locate specified sensor locations (B1S1, downstream left, etc.)?
Refer to the diagrams below.
Left and right sensor positions are found in reference to the rear of the engine (the side opposite of the belts).
Upstream (pre-cat) and downstream (post-cat) are found in reference to the catalytic is a California emissions sensor? How do I know if I need one?
A California emissions O2 sensor is meant for vehicles that are designed to meet California emission regulations. Such vehicles should have a sticker under the hood or on the driver’s door jamb that identify them.
PACKAGE INCLUDED:
NEW PREMIUM HIGH PERFORMANCE O2 OXYGEN SENSOR
Item SpecificsManufacturer Part Number :O2 Oxygen Sensor (Not Air Fuel Ratio Sensor)Reference Part Number :234-2010Location :Please Check the Notes of Compatibility tableSurface Finish :Brand NewWarranty :YesBrand :AftermarketLength :20 Inches# of Wires :2UPC :712367165222UPC :712367165222Shipping
Payment
Returns
Customer Services
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to offerding/buying.][We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.]
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before offerding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. ]Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my "-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]1. We will leave positive response once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral response. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive response to all our customers.
3. If you are satisfied with the product you received, please leave us positive response and 5 scores DSR.]
Copyright of CN-Batteries. All rights reserved.
Powered by SoldEazy
Brand New Downstream 02 Oxygen Sensor for 1994-1999 Toyota Celica 2.2L O2 Sensor:
$16.19