5/8" 12 Volt Dc Electric Solenoid Valve Hose Barbs Water 12vdc N/c Plastic Body
This item has been shown 22777 times.
5/8" 12 Volt Dc Electric Solenoid Valve Hose Barbs Water 12vdc N/c Plastic Body :
Valves4projects — supplying high quality valves since
2004. Over 50,000 valve orders shipped.
EHCOTECH EEB-CS-12VDC SOLENOID VALVE
5/8" HOSE BARBS | 12-Volt DC
| Nylon Valve Body / NBR Seal | Normally Closed
| 3 - 145 psi
NOTE: This valve is for pressurized systems only. We have a gravity feed version of this valve in our store.
- Great general purpose water valve for many projects
- 2-way, Normally Closed (energize to
open, de-energize to close), unidirectional
- Very Fast acting
- Can be mounted in any position
- Note: valve body color may be black or
natural nylon color
- 5/8" hose barb inlet / outlet ports
(for 5/8" inside diameter hose)
- Internal orifice diameter: 8 mm (about 3/8")
- Flow rate at 50 psi is >4GPM.
- 3 to 145 psi (not for gravity feed
- Max media temp: 175° F (80° C)
- For use in pressurized systems only
- Note: most low pressure, high volume fountain
type pumps do not work with these types of solenoid valves
- Low viscosity fluids compantible with valve
- DO NOT use with fuels
- 12-Volt DC / 450 mA
- Standard 1/4" spade connectors for electrical connection (connectors available in hardware stores, auto parts stores etc.)
- Wires can also also be soldered to the
- No polarity requirements (connect positive to
one termial and negative to the other)
- NOTE: We also carry this valve in 24VDC,
24VAC, and 120VAC voltages in our
- Valve body: Nylon
- Plunger and plunger guide tube: Stainless
Steel (300 and 400 series)
- Diaphragm: NBR
- Diaphragm plate: Polyoxymethylene (POM)
- Height: 2-3/8"
- Width: 1-7/16" (without electrical
- Length: 3-5/8"
- Weight: 4 oz
- If you are not completely satisfied, please contact us and we will make it right!
- 12 month warranty