Engine Rebuild Kit - Honda CB750 - 1969-1976 - Rings Top Bottom End + Seals

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Engine Rebuild Kit - Honda CB750 - 1969-1976 - Rings Top Bottom End + Seals:
$122.95

Engine rebuild kit for the Honda CB750 form 1969-1976, note the VIN range for the 1976 models in the fitment below. Time to rebuild? If you\'\'re diving in and doing the top end, honing the cylinders, replacing engine side cover gaskets and replacing some seals this is a great kit to have on hand! The piston rings are for the stock bore.

Gasket Set Includes

12329-300-020 - Breather Cover Gasket - x1
12391-300-040 - Cylinder Head Cover Gasket - x1
91302-001-020 - O-Ring 30.8mm - x8
91305-323-000 - O-Ring 5.8 x 1.9mm - x4
91304-286-000 - O-Ring 61.8 x 2mm - x4
12251-300-004 - Cylinder Head Gasket - x1
12191-300-030 - Cylinder Base Gasket - x1
14592-300-000 - Cam Chain Tensioner Gasket - x1
18291-254-000 - Exhaust Gasket - x4
12209-300-003 - Valve Stem Seal - x8
30372-300-300 - Points Cover Gasket - x1
11396-300-303 - Clutch Cover Gasket - x1
11397-300-303 - Alternator Cover Gasket - x1
31282-300-020 - Starter Motor Cover Gasket - x1
11395-300-040 - Transmission Cover Gasket - x1
11398-300-303 - Oil Pan Gasket - x1
15135-300-010 - Oil Pump Gasket - x1
91318-300-013 - Sealing Rubber - x6
12115-300-000 - Cylinder Stud Gasket - x8

Oil Seal Kit Includes:

91202-216-000 / 91202-302-010 /91202-KFL-841- Clutch Arm Seal - SR type - 13.8 x 24 x 5
91206-286-005 /91206-286-013/91206-286-003 - Shift Shaft Seal - 14 x 28 x 7
91201-300-003 - Crank Seal - 30 x 42 x 8
91215-300-003 - Starting Clutch Gear Seal - 25 x 33 x 4
91204-286-003 /91204-286-005 - Kickstart Oil Seal - 18 x 29 x 7
91211-286-003- Tach Drive Oil Seal - 4.8 x 14.5 x 4
91205-300-005 - Countershaft Seal - 25 x 62 x 8

Piston Ring Features:

Ductile Iron Casting (FCD) is superior to OEM rings which were sometimes made from steel.
Superior tensile strength, ductility and elongation compared to steel rings.
FCD is even stronger than regular cast iron.
FCD is used in many automotive parts, which require strength and durability.

Installation Tips:

Be very careful when installing the cylinder over new rings, it\'\'s helpful to have the proper tool to keep the rings compressed as you lower the cylinder over the pistons.Try to use only plastic tipped tools to prevent from scratching aluminum surfaces.
The Letter stamped on the top two rings should be facing up when installing them and stagger the ring gaps according to the manual.
Press your seals in straight with a seal driver or a socket with a slightly smaller OD than the seal. Both surfaces must be free of dirt to create an oil tight seal.
All sealing surfaces for gaskets must be clean and flat to make a proper seal, sometimes non-hardening sealant is necessary.

Piston Ring Order:

Top Compression Ring (silver outer rim)
Second Ring (black outer rim)
Bottom Rings (3 pieces - Spacer in the middle - 1 thin ring on either side)

Fits Honda:

CB750F Super Sport - 1975-1976 (1976 - Use up to Engine SN 2551567)
CB750K - 1969-1976 (1976 VIN CB750-2540001 - CB750-2575894)

4into1motorcycleparts•Store Policies