# 367 Hot Rod Flat Satin Black Single Stage Acrylic Enamel Gallon (Paint Only)

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

# 367 Hot Rod Flat Satin Black Single Stage Acrylic Enamel Gallon (Paint Only):
$87.95

ALL PACKAGES ARE INSURED FOR PEACE OF MIND!!

The #367 Flat, Hot Rod, Satin Black, isa Single Stage Acrylic Enamel Paint.

This is a Flat NO GLOSS Paint

MIXED TO OUR CUSTOM FORMULA

NOT MIXED TO ANY OEM PAINT CODE!!!!

FOR PROFESSIONAL USE

TO ACHIEVE THE FLAT FINISH SPRAY ON IN LIGHTCOATS / TO ACHIEVE THE SATIN FINISH (WITH A LITTLE GLOSS) SPRAY ON IN WET COATS.

This is for

1 ~GallonFlat Acrylic EnamelPaint (Paint Only)

Sticks &Strainers

Mix is 8 Parts paint to 1 Part Hardener to 1 to 2 Parts Reducer.

The amount of Reducer will depend on your spray preferenceand the type of spray gun used.

Flash Time Between Coats @ 70 Degrees is About 15 Minutes. You Will Need to Spray 4 to 5 Coats of Paint.

This Paint Can Be Cleared with a Urethane Clear Coat. Non-Metallic Paint,Clear after a 15 Minute Flash Time.

Metallic Paint Let Dry 1 to 1 1/2 Hours Before Clearing.

Factory Packs are Mixed in Large Volumes at a Time.

All Paints are Shipped byUPS Ground ONLYin UPS Approved Boxes.

\"For Questions Call\"

Store ~ 4176324894

Store Hours ~ Monday - Friday

8:00am to 12:00pm

1:00pm to 5:00pm CST

USA Made, in Missouri.

Ships to the lower 48 states ONLY!

\"I have been using and selling this paint for over 20 years\".

Due to health risk, approved safety equipment, and clothing should be used.