Lumenier TX5GS 25-200-500mW 5.8GHz FPV Transmitter w/ BFCMS Control (MMCX)

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Lumenier TX5GS 25-200-500mW 5.8GHz FPV Transmitter w/ BFCMS Control (MMCX):
$33.95

The Lumenier TX5GS 25-200-500mW 5.8GHz FPV Video Transmitter w/ BFCMS Controlis the perfect all around FPV VTX. This transmitter features the latest in VTX technology allowing you to fully operate Frequency and Power settings via your Radio Controller or BetaFlight OSD. No more needing to reach into your drone to manually change channels, just do it from the comfort of your chair (Manual button control is also there if you need it). This transmitter is enabled with adjustable power settings as well, from 25mW all the way to 500mW. So whether you\'re at a race or flying long range, the TX5GS has you covered.

The TX5GS includes a 5v output to power FPV cameras and a stand alone audio pin to transmit sound to your receiver. It also uses the robust MMCX style antenna connector. This connection is much stronger compared to the U.FL style, allowing you to connect / disconnect hundreds of times without the worry of it wearing out. TheLumenier AXII Antenna with MMCX connectoris the perfect match to the TX5GS.

The TX5GS features easy to use buttons with LED interface to manually change bands, channels, and power output. It also has easy to solder to pads for the connections, so no more worrying about breaking a small connector in a crash. All this is packed into a 36*22*6.5mm sized transmitter weighing only 5g! This transmitter is capable of outputting a lot of power, so mount it in an area where it will have good air flow.

Features

Small and Lightweight
Stackable on standard 30.5x30.5 FC mounting holes
BFCMS controls via BetaFlight & LUA Script(similar to Smart Audio)
Adjustable Power 25-200-500mW
Wide Input Voltage with 5v output for Camera
Solid MMCX antenna connection

Specifications:

Input voltage:7~27V(2~6S LiPo)
32 Channels:(US Legal) A/E/F/R Band
Output Power:25, 200, 500mW switchable
BEC Output:5V/1A redundancy for Camera or FC
Traditional Button +LED control of frequency and power
BFCMS(BFOSD & LUA Script) control via FC UART _TX (Use Tramp Protocal in BF)
Power Consumption:3.1W Max. @ 500mW
Video Input Impedance:75 Ohm
Audio Subcarrier Frequency:6.5 MHz
RF Connector:MMCX
Video Format:NTSC/PAL
Stackable or Double side tape mountable
Firmware upgradeable
Weight:5g (Tx only, w/o SMA cable)
Size:36*22*6.5mm w/30.5mm mounting

User Manual

Download the Lumenier TX5GS VTX User Manual

TX5GS Frequency 1Boscam A58655845582558055785576557455725Band 2E / Lu57055685566557525885590559255866Band 3FS / IRC57405760578058005820584058605880Band style=\"box-sizing: border-box; margin: 0px 0px 15px; line-height: 1.5; color: rgb(119, 119, 119); font-family: "Open Sans", Arial, Helvetica, sans-serif; font-size: 13px; background-color: rgb(255, 255, 255); outline: none !important;\">

Included

1 x Lumenier TX5GS
1 x MMCX to SMA Pigtail Extension Cable RG178 cable 9cm
Clear PVC Heat-Shrink Tubing
(Antenna not included)

Suggested Antenna

For a direct Antenna hookup we suggest theLumenier AXII Antenna with MMCX Connector in RHCP, orLHCPversions.

*Note: TX antenna must be installed properly before it is switched on. Powering on without installing an antenna, or using an improper antenna may easily burn the TX, and such damage is not covered by warranty.