ONIMARU ARMY OF TWO PAINTBALL AIRSOFT BB MASK MIST CAMO

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

ONIMARU ARMY OF TWO PAINTBALL AIRSOFT BB MASK MIST CAMO:
$154.00

Forget outdate fiberglass mask then wear the future Onimaru ABS mask!!!!

From the results of our research taken more than two years ,we have found that the best thing the mask should possess is the endurability and the safety of the mask. Because what we sell is the protection for the users from the danger of the bullets of the paintball and the airsoft. So we choose to design and produce the masks by using industrial method instead of using hands in order to be sure that our every mask has the same high quality and last but not least to add a touch of art into that high quality product under the brand name Onimaru.

Designing by using the drawing software ,used by industrial work, you can be sure of the symmetry of the profile of the mask which is different from the hand-sculpted mask which is difficult to have a perfect symmetry.

Material Made from high quality plastic ABS which is not a recycled –plastic, so you can be sure of the high quality of our every mask you purchase and it is not made from the fiberglass which must be hand molded only which making it hard to control the same standard quality of every piece. Our every mask is quality.

Paintjob The plastic ABS is widely accepted as being suitable for doing paint-work which is widely used in the car industry such as the bumper, so you can be sure of the endurability of the paint of our mask.

Ventilation system Our mask design has given more space between your nose and mouth, so you can breathe easier than through a hole from the sideway of the mask.Our design not only gives more room for ventilation but also reinforces a natural way of breathing which is up and down and down and up not on the side way.

Eye protection we have chosen the polycarbonate of the size 2.5.mm to protect your eyes instead of the acrylic because of not only its superior material quality when compared millimeter by millimeter but also its thinner lens produce less vapor on them. And apart from this we have four knots to fix each lens on the mask not using the epoxy glue, because epoxy glue cannot sustain strong impact, so it is not suitable for fixing the lens used for paintball and airsoft high velocity bullets. And besides, the epoxy glue decay with time, so it is dangerous to use the long left-out epoxy fixed lens mask.

Vision The thinness of the lens which is only 2.5 mm gives a clearer vision. Because a thicker lens gives an inaccurate vision. With a lens of 3.2 cm wide and 7cm long which is a bigger size and from our research, you can be sure that you will not be easily shot on the side way from your opponent.

Anti fog Because the material we use for our lens are more superior, and the ventilation space is bigger, you will be sure to receive better anti fog.

Adjustable and supporting liners Wearing your mask with locks on every strap and adjustable liners for firmness and having a small pocket at the back of the straps.

The most lightest mask Only 0.48 Kilograms(padding,lens and metal parts are included) for every mask we sale (lighter than fiberglass mask 25%)

Here are the definitions and general properties:What is what?=============="What is fiberglass? Fiberglass fibers are made from molten glass extruded at a specifieddiameter. The fibers are gathered into bundles and the bundlescombined create a roving. Rovings are a continuous rope, similar totwine, and are wound on a mandrel to form a ball called a doff.Reinforcements for frp are made from rovings that are either choppedinto short strands or woven into a cloth...""Frp, fiberglass reinforced plastic, is a composite made fromfiberglass reinforcement in a plastic (polymer) matrix. A constructionanalogy would be the steel reinforcing bars in a concrete matrix forhighways.....""What are plastic/polymers? There are two basic types of plastics/polymers: thermoplastic and is ABS = Poly(Acrylonitrile, Butadiene, Styrene) "ABS is a copolymer of Acrylonitrile, Butadiene, and Styrene. ABSplastics generally possess medium strength and performance and mediumcost; ABS is often used as the cost and performance dividing linebetween standard plastics (PVC, polyethylene, polystyrene, etc.) andengineering plastics (acrylic, nylon, acetal, etc.). ABS polymers canbe engineered by the manufacturer togive a range of physicalproperties, depending on the ratio of the monomeric constituents andthe molecular level connectivity. Typically, a styrene-acrylonitrileglassy phase is toughened by an rubber in general:"...the composite material is commonly referred to by the name of itsreinforcing fibers (fiberglass), an example of part-for-wholemetonymy. The plastic is most often polyester or vinylester, but otherplastics, like epoxy (GRE), are also sometimes advantage of ABS is that this material combines the strength andrigidity of the acrylonitrile and styrene polymers with the toughnessof the polybutadiene rubber. The most amazing mechanical properties ofABS are resistance and toughness. A variety of modifications can bemade to improve impact resistance, toughness, and heat resistance. Forinstance, the impact resistance can be amplified by increasing theproportions of polybutadiene in relation to styrene and acrylonitrilealthough this causes changes in other properties. Impact resistancedoes not fall off rapidly at lower fibers are useful because of their high ratio of surface area toweight. However, the increased surface makes them much moresusceptible to chemical attack.By trapping air within them, blocks of glass fibre make good thermalinsulation, with a thermal resistance of 0.04 W/mK.Glass strengths are usually tested and reported for "virgin" fiberswhich have just been manufactured. The freshest, thinnest fibers arethe strongest and this is thought to be due to the fact that it iseasier for thinner fibers to bend. The more the surface is scratched,the less the resulting tenacity is. [3] Because glass has an amorphousstructure, its properties are the same along the fiber and across thefiber. [2] Humidity is an important factor in the tensile strength.Moisture is easily adsorbed, and can worsen microscopic cracks andsurface defects, and lessen tenacity.In contrast to carbon fiber, glass can undergo more elongation beforeit breaks. [2]The viscosity of the molten glass is very important for manufacturingsuccess. During drawing (pulling of the glass to reduce fibercircumference) the viscosity should be relatively low. If it is toohigh the fiber will break during drawing, however if it is too low theglass will form droplets rather than drawing out into Testing please see this video clip :Durabiliy comparison between Onimaru plastic ABS mask for airsoft and paint ball using and high quality fiberglass mask with airsoft bullet at 470-490 ft/sec shooting range 3 inches-2 feet.

Payment We accept payment via paypal. Buyer must make payment within 3 days after placing buying order.

Shipping and handling we will send the item it with in 3days after payment is done the item will arrive you within 14-28 day via registered airmail with tracking number.

Customs formality and Taxes Buyer is responsible for the import-taxes payment according to the law of the buyer’s country.

Return policy All items can be returned within 7days after buyer has received the items the returned items must be in the same condition as received. The buyer must be responsible for the payment of the returned items shipment and the shipment must be done by the standard method such as having tracking number as a solid evidence of our transaction.

response We will appreciate very much for your positive response and five star rating. Because your response and rating give us motivation to further improve our product for better and higher quality.