PIANOCORDER PARTS INVENTORY CLOSEOUT

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

PIANOCORDER PARTS INVENTORY CLOSEOUT:
$100.00

70I AM CLOSING OUT THE LAST OF A DEALER\'S PIANOCORDER PARTS IN ONE LOT. PLEASE REVIEW THE FOLLOWING LIST OF ITEMS AND ASK ANY QUESTIONS YOU MIGHT HAVE ABOUT ANY OF IT. THE PHOTOS INCLUDED DO NOT INCLUDE EVERY ITEM SO ASK IF YOU ARE UNCERTAIN ABOUT ANY PIECE. IT WILL BE SHIPPED IN TWO BOXES WITH A TOTAL WEIGHT ABOUT 20 POUNDS. PLEASE WAIT TO PAY UNTIL I SEND YOU AN INVOICE. THESE PARTS ARE BECOMING INCREASINGLY SCARCE SO IF YOU WANT SPARES OR NEED SOMETHING TO FILL IN, THIS IS THE TIME TO GET IT.

PIANOCORDER PARTS 01/18/16

ELECTRICAL

Quantity Description

Extra Harness Cables

2 #9-D.E.Blue (44”)

1 #8-D.E.Yellow (34”)

1 #14-D.E.Red (49”) (one corner of one end chipped)*

8 #4-Red& Black Jumpers (18”)

2 RecorderHousing Cables

1 D.E.Green (35”)

2 Red& Black Jumper Cable (48”)

(oneof these has a chip out of three corners of the connector ends)*

2 Green Jumper Cables (29”)

1 D.E.White w/red tips mounted at

90degrees (38”)

1 D.E.White w/1 yellow wire (only 12 cables) (21”)

1 set* Pair of cables (D.E.?) green, yellow, brownover yellow,

greenover brown, white. Each has a different plug

connectordesign.

*These connector end housingsappear to be very brittle. The chips donot appear to interfere with the function?

1 Box* Labeled “Remote Recorder Kit Model PA102”contains: 100’ remote cable a small rectangularblack plastic housing with screws for installation. The housing is empty.

Item that I am unable to identifywhich looks to me like it might be a relay (similar to an old radio tube!).

1 PedalSwitch Assembly but the bag has been opened and the frosted Cable (Actuator Pedal Switch) is missing.

Electrical Accessories

4 Whiteon/off power switches

1 Bagof assorted fuses (19)

Assorted Lightbulbs

Assorted Cableties

4 7/8”cardboard washers

1 Aluminummount for power switch

3 “Bag6” – Power Supply: contains 6 metal screws #6, ½” long,

1self-tap screw #6, 5/16” & rectangular ground plate.

1 Bagof plastic cable clips with screws

CASSETTE

1 On/offswitch for tape deck

See Extra HarnessCables for Recorder Housing Cables

SOLENOIDS

1 PedalSolenoid complete with wooden blocks, and “Bag 7” with

6” wooden rods and installationhardware.

2 PedalSolenoids assembled to install

2 Bagsassorted solenoid felts

1 Bagassorted springs, 2 sizes, aprox. 5 each

1* Group of 3 grey, heavy metal parts-unidentified

1 Bagof assorted solenoid parts: 4 round black nylon couplers and 2Wood Bases

KEY SOLENOID COMPONENTS

Assorted Screws,felt tips, hard caps, metal washers, small spring clips, nylon washers, felt spacers, nuts

MISCELLANEOUS

10 Pianocorderbrass nameplates with brass screws

1 Bag“Warning” labels

PRINTED CIRCUIT BOARDS – new, untested

2 100-04DO10 Record Board

2 100-04DO03

1* Small circuit board, no#, 2 ½”x5 ½”

2 DriverBoard Mounts -Aluminum right angle channels 4 1/8” longw/screw holes for mounting.

1 Bagnylon standoffs, long and short

I do my best to describe accuratelyand presentitems in photos.This is sold \"as is\". Please remember that antique/vintage items will show signs of wear acquired through time. I will describe any specific damage I am able to see. If you have questions after reviewing the description, please email me before you offer. I will respond to response left for me.

If you feel you need to leave a response score other than a 5, please contact me to explain. I cannot please you if I do not know there could be an issue and I would like to havethe opportunityfor remedy if possible. Sellers live and die by their response and we are all trying hard to be sure your experience is a good one.