STEEL SEAL HEAD GASKET SEALER, MCP,,,PROFESSIONAL,GUARANTEE,32 OZ , 6&8 CYLINDER

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

STEEL SEAL HEAD GASKET SEALER, MCP,,,PROFESSIONAL,GUARANTEE,32 OZ , 6&8 CYLINDER:
$85.99

STEEL SEAL HEAD GASKET SEALER ,MCP Repair Crack In Cylinder Blocks Without DismantlingUsed by all Automotive ManufacturesConfirmed UK Examination of Trade StandardEngine Seal Ltd.

.
%100 Money Back Guarantee

Automotive repairMany automotive engines may lose their coolant by any one of several means. It may have a blown head gasket, a warped head, a cracked block, a leaking freeze plug, a heating core leak, aradiator leak or a lost pet cock. The engine will overheat rapidly as the coolant disappears. Additionally, coolant within the crankcase leads to rapid corrosion and coolant within a cylinder prevents ignition. For all of these reasons, coolant leaks must be repaired.Repairing these sources of leaks may be quite expensive. That\'s why cooling system sealants based on(Steel Seal Head Gasket) have been marketed with the objective of stopping the leak without incurring the substantial expense of automotive repairs.How to use\'Liquid \'can be used to seal leaks at the cylinder and head gasket. Rather than pull the head, a jar of\"liquid \"is poured into the radiator and allowed to circulate. The\'Liquid \'is injected via the radiator water into the hotspot at the motor.A (Steel Seal Head Gasket)repair of a leaking head gasket and cylinder can hold for permanent. The effect will be almost instant, and steam from the radiator water will stop coming out the exhaust within minutes ofapplication. This repair only works with water to cylinder or water to Air applications and where the \'Liquid \'reaches the \"conversion\" temperature of 93C.How does it work\"Liquid \"since it turns to glass when dried. When added to coolant, first it is sucked into a crack by the intake suction, and then the exhaust blast dries some of it out and turns it to glass, making the leak smaller. This continues with each stroke, the leak getting smaller and smaller as concentric layers ofglass are laid down, until the leak stops leaking.SpecificationsPermanently Seals:Cracked Cylinder Heads,Blown Head Gaskets, All Block Leaks.Permanently Seals: Works On:
Cracked Cylinder Heads Gasoline and Diesel Engines
Blown Head Gaskets Cast Iron or Aluminum Blocks & Heads
Intake Gasket Leaks MLS - Multi Layer Steel Gasket
All Block Leaks Copper Head Gaskets
Other Severe Coolant Leaks
Composite Head Gaskets

Health & safetyRisk phrases: R34 Causes burns. R37 Irritating to respiratory system.Safety phrases: S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).500 ML used for Engine four Cylinders750 ML Used for Engine six Cylinders1000ML used for Engine eight Cylinders

Steel Seal Head Gasket Ltd.

Steel Seal Head Gasket

Fixes most leaks in all types of water cooled engine including cracked heads, head gasket failures, cracked blocks, radiators, heater cores and water pumps.
A repair made with Steel Seal Head Gasket is permanent, guaranteed for the lifetime of the engine.
Unlike inferior coolant products, MCP Seal mixes with all types of antifreeze and coolant.