Sm Prospecting Hand Dredge Nugget Sluice Gold Sucker Pump

Sm Prospecting Hand Dredge Nugget Sluice Gold Sucker Pump

This item has been shown 0 times.

Buy Now

Sm Prospecting Hand Dredge Nugget Sluice Gold Sucker Pump:


(Available on the internet too!)

SANDMAN SYSTEM FissureMan- Basic Hand Dredge AND SANDMAN Attachment

This product system is being provided to addressrequests received from individuals shopping for FissureMan hand dredge technology with hose & bucket collection capability. This system is comprised of a FissureMan- Basic Hand Dredge bodyand a SANDMANAttachment that will allow the mass collection of materialat1.00" overall size or smaller.

Works great!! Surprised by how much and how fast it filled up!! Great item! wsc-computers


This system has been expertly manufactured and designed for use with the bayonet connection points found on the advanced FissureMan II and GOLD-N-ROD models. This design set allows for future upgrade of the system with additional sniping nozzles and collection capabilities, at a later date if desired, without the loss of the original functionality.

The product system offered comes supplied with a 1.5” ID FATBoy nozzleplus2- 1/2" ID nozzlesfor snipingto provide a complete collection capability that will allow setup at a given location in a stream bedto provide the prospector an ability to access and easily retrieve gold or gemstone bearing material for processing in sluices, high bankers, spiral wheel separators or any chosen piece of processing equipment.

Withthe two-gallon collection capacity, the SANDMANSystem easily collects large quantities of material (literally gallons!) very quickly. This is a great tool to use where a powered dredge is not allowed as this tool is the best way to move large volumes of material from under water almost as easily assome powered dredge. No more lost time and/or fatigue from transferring small amounts of material to and fro to your processing equipment as performed with common open-ended hand dredges. The SANDMANSystemprovides volume material collection performance that far out paces any one pull and dump simple hand dredge design claiming to be efficient for moving a lot of material.

Concerning check valves:

Check valves come in an assortment of mechanical designs to be used for various functional requirements. Many check valve designs are made for liquid or gas control.

One specific valve design used for slurry control is the Swing Check Valve.

(Definition of “slurry”: “a watery mixture of insoluble matter”)

The Swing Check Valve has been in use for over 80 years to control the flow of slurries of various material types from abrasives to sludge. This design is used because particulate matter within the flow stream does not adversely affect its operation.

It has been indicated on a competing sale page that “check valves and flapper valves do jam and plug”. This is only true if a correct valve design and construction approach is not used for the intended purpose – that is - to capture and move slurry materials. It should be noted that FissureMan check valves are not standard off-the-shelf hardware store check valves that are normally used to transfer clear or semi-clear fluids.

The check valve used with the SANDMANAttachment are a simplified version of the time-tested and reliable Swing Check Valve. They have been referred to loosely as flap valves.

All FissureMan check valves are designed and constructed in-house to provide a valve system that works as required and by design, greatly reduce the occasional malfunction that might be experienced with other check valve designs.

Foradditional informationregarding the check valve please visit:


NOTE: The above video wasprovidedto exhibit the 2"FISSUREMANBasic Hand Dredge and SANDMANattachment collection ability.

Relying on personal opinions, unsubstantiated beliefs orsimple pictures that you might come across mayappeargood on the surface butreally mean littleto nothingwhen anunedited, contiguousvideo sequencecan be faked, words easily writtenin any way an author wants them to be (i.e. - a picture of a hole in the ground could have just as easily been dugwith a shovel rather than withsome super suckinghand dredge)as a resultone could never knowthe differenceby reviewingpictures alone.Non-segmented, continuous videois the next best thing to doing it yourself. With a videoyou canobservea real timedemonstration of aneventthat allowsa viewer tomaketheir ownjudgment of a given device's actual performance.

Pictures are worth a thousand words butvideos arethe whole book!

The following videois for presentation of the latest SANDMAN design innovation:

FissureMan Bucket Relief Valve or "BRV"


- You be the judge -

Available now!

An allnew collection bucket design.

FissureMan Online has been working on redesigning the current bucket for sometime now. Althoughwe are not the first manufacturer to release a new design we do believe itto be the ultimate for ease of use when compared to any other design.

There will be no need to take the hose off the bucket to unscrew the lid or use a tool to pry the lid off to access to the material - the lid is hinged!

The lid is also easy to open -it takes just one hand! When closed, the lid issecure enoughthatwhen loaded with material,turned upside downand shaken, the lid won't open.

A BRV is incorporated justaswith the original round bucket and works identical to what is shown in the video.

The newsquare bucket designis translucent (just as all whitepoly material is) and when in direct sunlight, allows some view of how much material there is in the bucket.

Pleaserefer tothe attachedpicturesto see what the newdesign looks like.

product looks Great easy to put together and use shipping only took 2 days thanks stiscoobydoo1

It works perfect the best investment I've made thank you rayc4304

Hi Dennis, I just recieved the GoldSucker and sat there over an hour admiring the engineering craftsmanship in your item. It`s about the best built and engineered device I`ve seen on a lot of years. I`am a 68 yr. old electrician and have been prospecting here in Indiana for Glacial gold for a number of years. Real fine gold here but also found 4 small diamonds. I usually build my own equipment until I saw your device on . I haven`t see such quality for the buck in years. I hope to retire soon to Dahlonega, Georgia,( The Gold Capital Of The East), and get a few acres on the Yahoola River. The river is the best producer on the whole East coast. In October I am going to Georgia for a week and will use the Fissureman exclusivly with my Minelab detector. I will take some pictures and send them to you showing your Fissureman in action. I am going to build a small sluce box to attach to the Fissureman instead of the bucket as I will be pumping a lot of water anyway. Well, I need to get on now for your response. Thanks for the great product. Maybe after I retire to Georgia I might sell your Fissureman products locally. There is an unbelievable number of prospectors there what with Dahlonega being a major year- round tourist spot. Well, better go now. Will keep you posted. Best Regards, bookofruth


Ø Usescheck valves thatare inexpensive, easily accessed and thathavethe largestflow through ID available.

Ø Two additional nozzles(12"L & 6"L) are provided tobe used for sniping/samplingwith the SANDMAN attached.

ØFast, no wait shipment combined with both pre and post sale customer assistance.



Find a suitable location containing plenty of sand, gravel,water and hopefully gold.Place the SANDMANAttachment ontheFissureMan II- Basic Hand Dredge per the included, easy to follow instructions. Set and secure the collection bucket nearby and then pump the hand dredge to gain a prime andfill the bucket with enough water to weigh it down.This will provide initial stabilization for the bucket when you start to collect material. Begin suction collection of your material. Suction and collect as much material as the bucket can hold or that you can easily move to your processing equipment. To empty,open the hinged lidand transfer the collected material to your pan, sluice, high banker or whatever material processing equipment you prefer to use.Close the lid and begin again. It’s as simple as that!

The original round 2 gallon collection bucket used for the SANDMAN Attachment (as well some competition's versions)is not manufacturedto allowthe lid to beremoved usingacommonlid removal tool such asisprovidedfor thelids on5 gallon paint buckets.

FissureMan innovation hastaken thisissueand done something about it!!!


- Amodified 5 gallon lid removal tool for direct usewith a round 2 gallon bucket snap lock lid. -

(It also will workonall competing product round collection snap on bucket lids).

Pleasemake contact for a "buy it now" arrangementif you want to obtain one for a previous SANDMANpurchase.

Operational tip: When in slow moving water you only have to set the bucket in place and begin collection. Within fast moving water it is advised that you tetherthe bucketwith a rope or other suitable restraining strap attached to a stake or ground screw driven into the streambed orbank nearby. Alternatively, a large rock or other natural anchor will work as well. Tethering the bucket to yourselfhas been done but is not advised as fast moving water may pick up the bucket and carry it away and while doing so may possibly drag you down stream with it.

Purchase the Fissureman Hand Dredgewith the SANDMANAttachment offered hereto obtain material collection capability of the most advanced and versatile hand dredge collection system in the gold and gemstone prospecting field.

NOTE: When shipping with USPS 3 Day Priority Mail, the items offered on this pagemayship in two separate boxesto US destinations to keep USPS shipping cost as low as possible.

What you will receive:

FissureMan- 38" LNo-Frills Hand Dredge Body



1.5” ID X 8" L 60 degreeFATBoy Nozzle

Two½” ID sniping nozzles

Two1.00” ID Check Valves

6 Feet of flexible collection hose

Two Gallon vented square collection bucket

Price: $89.50

I want your FissureMan purchase to bethe smoothest andbest possible experience available.

- The only dumb question is the one that was not asked -

Should you feel negativeor neutral responseis warranted - for any reason -please make contactprior to placing it sothere isanopportunity to rectify yourissue.

This is askedonly to obtain your completesatisfaction.

For questions,special requestsor additional information regarding purchase please contact:



FissureMan Online products ship internationally worldwide!

Especially to:





United Kingdom

South America


To provide all FissureMan customers with:

- A quality product with exceptional workmanship, construction, detail and final packaging.

- items only of product that is ready for direct and immediate shipment.

-The ultimate “extra mile” focus on customer satisfaction.

With a FISSUREMAN you have the assurance I will stand with my product,

not "behind" it waving goodbye.

Gr8 Product Works As Described, Fast/Fair Shipping Highly Recommend apex-sales


Sm Prospecting Hand Dredge Nugget Sluice Gold Sucker Pump:

Buy Now

Beading & Jewelry Making 13
Beading & Jewelry Making 13" Heat Resistant Safety Melting Furnace Gloves Gold

20 New 2.5
20 New 2.5" Big Glass Gold Vials 1+oz Prospecting Pan Panning Dredge Sluice Free

The Week - End Gold Miner  Mining Tips Book A H Ryan Phd 1968 Great Info 56 Pg  picture
The Week - End Gold Miner Mining Tips Book A H Ryan Phd 1968 Great Info 56 Pg

Se Gp1001bl 10-inch Plastic Gold Mining Pan Green 4-pack picture
Se Gp1001bl 10-inch Plastic Gold Mining Pan Green 4-pack

Se Gp1011g8 8
Se Gp1011g8 8" Green Plastic Gold Pan With Two Types Of Riffles

Stansport Prospecting Pick picture
Stansport Prospecting Pick